ceffyn said:
filler and drain plugs are both destroyed and look to be rust welded to go with it
Click to expand...

If you had to get in there, You could try welding a nut /bolt onto the plug , spray and then give it a good wrenching.

Cheers
 
any more damaged and i'll be able to put a round bar in it with a snug fit the filler or the drain, thought bout welding a small bar of sorts to it and hitting it but figured no point the entire thing looks like its on its last legs just let it die and get myself a good excuse to tell the mrs why i need a new back end haha
 
Magicgrotto said:
Hope she dunt take that the wrong way:eek::eek::eek::eek:
& i'm glad i live up here when you tell her :oops::oops::oops::rolleyes:
Click to expand...
im easing it in slowly lol let her know the parts needed to drain and fill it wont come out they are broken. and told her it "could" brake more internals if i cant get them out. next stage is to let her know i've tried it and cant get them to move. then final stage is "babe it died back of the cars not working im gonna have to try get a new one. i'll see if i can find a 2nd hand one be cheaper than main dealer new" then i go find me a 200tdi rear end and prop lol
 
If I was you, I would try welding the plugs to see if I can get them out, if they do release then find a second hand Diff with a 4 bolt flange. If not, then you can try and find an axle , but a disco one will not have the 4 bolt flange.

Job done.

Cheers
 
I thought we were talkin about diffs & knocks or clunks & in 2/3 posts yu'v turned it into sexy back ends :eek::eek::eek::eek::eek::rolleyes::p
 
im not i tried a breaker bar but it just kept slipping as the bungs are too messed up. in the next few weeks i will be "trying" to weld something to them and then remove them but i can be almost 100% sure this isnt going to work. (stage 2 of the plan in action lol)
 
Piece Of 1/2" BAR welded in & then use ratchet ! If you can get it as hot as you can then thro COLD water on it ! should shrink it a bit then they should come out ! :rolleyes:
 
You must log in or register to reply here.

Similar threads

heggars
Disco 1 Turbo air leak under boost
Replies
2
Views
656
heggars
heggars
J
Discovery 2 td5 failed r9 to fuel pump
Replies
11
Views
648
Jambo2301
J
Rickspark
Oil Pressure Relief Valve - What should it look like?
Replies
3
Views
621
Rickspark
Rickspark
M
Drove through 2 feet of water, next day, clunking/sputtering when turning left/right slowly?
2 3
Replies
45
Views
2K
Stanleysteamer
Stanleysteamer
L
(SOLVED) - occasional clicking noise accompanied by power loss on acceleration during turbo onset
Replies
17
Views
2K
Wizard2003
Wizard2003