LandyBerks
New Member
Today:
removed and painted passenger floor
. Repaired hole in bat area and fixed bat clamp.
Fitted fire extinguishers,
painted ladder,
cut and fitted underlay to the rear to cut sound,
fixed washer bottle properly,
fitted rock sliders
, jet washed all round and under
done
removed and painted passenger floor
. Repaired hole in bat area and fixed bat clamp.
Fitted fire extinguishers,
painted ladder,
cut and fitted underlay to the rear to cut sound,
fixed washer bottle properly,
fitted rock sliders
, jet washed all round and under
done
gotoneatlast
New Member
subutteo and a pair of rollerskates
mk1astramad
New Member
well, yesterday i managed to mangle the front end of the rangey, trying to do a 360 in a space of about 10ft sq( id towed a non runner up the drive an had to get the rangey at the back of the car,so that i wasnt blocked in), i put it into the bushes to get a bit more swing...only problem was there was a fooking huge branch been cut off at indicator height, a quick blip of the throttle and im now looking at a nice little job for the week nite...if i can get the bits at a SENSIBLE price.
ah well....**** happens
ah well....**** happens
shadowster
Well-Known Member
taking the rooftent off
dirtyrhino
New Member
I stood in front of mine, looked at the xfer box on the floor, the winch in the garage, the snorkel kit i still haven't fitted, and the lightbar with no lights on in it's box - took a deep breath.........
........and went indoors for a cuppa instead.
........and went indoors for a cuppa instead.
Technically yesterday, but was nackered and not on internet last night ..
Replaced rear centre brake pipe, front nearside brakepipe, removed, fettled and replaced seals in rear offside caliper and pistons, bled, replacing all old fluid, whole brake system down and now it feels like brakes should feel!
Cleaned offside headlight connections, re-set nearside headlight level, and cleaned then pressure washed all spilt brake fluid off the calipers etc.
Put on a new front diff oil seal and bearing, new front propshaft and tidied the dents on the underside of the footwell up a bit.
Still to do ... fit a new oil cooler pipe to replace the one that's currently leaking, and re-do a rocker gasket that's also decided to start leaking this week, but they can wait a bit longer ..
Replaced rear centre brake pipe, front nearside brakepipe, removed, fettled and replaced seals in rear offside caliper and pistons, bled, replacing all old fluid, whole brake system down and now it feels like brakes should feel!
Cleaned offside headlight connections, re-set nearside headlight level, and cleaned then pressure washed all spilt brake fluid off the calipers etc.
Put on a new front diff oil seal and bearing, new front propshaft and tidied the dents on the underside of the footwell up a bit.
Still to do ... fit a new oil cooler pipe to replace the one that's currently leaking, and re-do a rocker gasket that's also decided to start leaking this week, but they can wait a bit longer ..
jai_landrover
Well-Known Member
Sunday we were helping out at a local trails comp and camped the night before on my almost finnished roof tent pics to follow.
timberjock
Active Member
towed the 90 home as the clutch mater cylnder \ slave cylinder hav givin up
discoboy84
New Member
i covered up my rusty back in end with duck tape untill after santa pod
and put some crappy lights on as mine was a 300tdi with lights and indicators in the bumper only
and put some crappy lights on as mine was a 300tdi with lights and indicators in the bumper only
concal
New Member
just had twoo weeks away towing caravan in my 300tdi auto and realised it was pulling right no power so after a lot of messing about and looking found a crack in one of thhe pipes going to the turbo repaired it and hey presto problem solved..........wish id looked sooner could have got on hols a bit quicker
discovered (sic) the front OS drive flange bolts werent even finger tight - anyone know the torque setting for these 5 bolts on a Disco? It isnt in my manual.
Answering my own Q - 65Nm when coated with Loctite 270.
- anyone know the torque setting for these 5 bolts on a Disco? It isnt in my manual.Answering my own Q - 65Nm when coated with Loctite 270
.
Last edited:
Series71
Space man
discovered (sic) the front OS drive flange bolts werent even finger tight
I had that too..I didnt notice till I got home from laning and one of the bolts had fell out !
Heavy Breather
Well-Known Member
bodged a 200 air filter box into my 300, some previous pillock had fitted a 200 snorkel with no filter
