I have seam sealed round the welds on the footwell I've welded in and cleaned years of underseal, oil and crud off my steering box column ready for the new top bearing, hopefully arriving tomorrow.
 
New track rod end fitted, took a little play out the front near-side wheel bearing and swivel pin. One shackle bush to do and she's ready for the mot.

Made a plan for picking up the ambulance...
 
oooh its a good one then :D



I'm off to mess with the V8's wiring and timing, need to order a new barrel too…….pulled a muscle in my back so probably wont be fitting the exhaust til tomorrow :(
 
Loaned it to the missus ...

Took her Mondeo for an MOT, failed on a lower front suspension ball joint .. so that's the 'tapping' she said she could hear then!!

Ah well, new one bought and car stripped as far as I can till me decent tools return in the back of the Disco!! ;)
 
Not today but yesterday started work at 6 finished at 3 then disco straight in garage at work and replaced swivel seal and replaced bearings finished at 11 last night (fecked isn't the word)
Only the other side to do now!!!!:eek:
Bastid of a job anorl
 
Sprayed some primer on my new footwell, starting to get some ware if I get a little bit done every night. Half an hour workshop tidying now.
 
batesy16 said:
erm wasn't the easiest thing to do - had to take green filter out completely so they had to be broke into small pieces

superglue is also handy as the green filters hold in the bulb holder, so these had to be fitted back on
Click to expand...

Should have just fitted white leds they turn the dash blue with the green filters intact. :D
 
Discovered why me brakes have gone to ****e. SErvo Vacuum Pump is spewing Oil everywhere. But I've sourced a replacement so hopefully all will be sorted tomorrow.
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
465
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
559
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
816
Knappster
Knappster
I
Re-coding of ABS Module after repacement
Replies
10
Views
892
invisible999
I
C
Freelander 1 crank no start
Replies
1
Views
1K
niccage
N