mephitic
Active Member
Effective for one day, meh....
timtheenchanteruk
Well-Known Member
Changed uj, fitted wind deflectors, got the oil temp guage plumbed in. Dropped sump plug in bucket of oil 
mikescuba
Well-Known Member
I have been having smoke issues with my Defender, I have been trying to fathom out what is causing the problem. The other day I left my very expensive camera on a picnic table with some strangers. I realised when I got home what I had done. I drove my Defender 54 kilometers on the motorway at 140 kph (86.9 mph)to retrieve my camera. I got my camera and seem to have sorted the smoking issue.
KeepDigging
New Member
Stripped the handbrake off
Realised I've ordered the wrong oil seal for the transfer box
Wondered what the wedge-shaped bits are that fell off the handbrake
Realised I've ordered the wrong oil seal for the transfer box
Wondered what the wedge-shaped bits are that fell off the handbrake
Stripped the handbrake off
Realised I've ordered the wrong oil seal for the transfer box
Wondered what the wedge-shaped bits are that fell off the handbrake
Look in the adjuster.
KeepDigging
New Member
Ah yes, that might make sense - wedges behind the adjuster to match the wedges on the front side.
Cheers!
Blue Bass
Member
Fitted new front mud flap to my Defender 90. New flap, rivnuts, rivnut inserter, bolts, grinding wheel for angle grinder.............looked so simple (and cheap) before I started! Thanks for all the previous advice on here on the subject. Couldn't have done it without it! Now ready for when the next one tears off!
pontyslapper
Brought a Landy to LZ11. Yay!!
Ordered 'im some shiny new bling bits - 4 rectangular spots for tha light bar I gived a fiver for back in August.
Blinking 34 nicka all told fer the 4 lights - not bad I s'pose, bar an lightage for just under 40 sheets!
I'm happy - SWMBO won't be, but fook it, its my landy an tha nights is drawing in - I needs to see where I is pointing the bugga
Blinking 34 nicka all told fer the 4 lights - not bad I s'pose, bar an lightage for just under 40 sheets!
I'm happy - SWMBO won't be, but fook it, its my landy an tha nights is drawing in - I needs to see where I is pointing the bugga
defender11069
AKA Mr cool...
well done del-boy...
Put it on Axle stands and took the wheels off. Gonna do the wheel bearings, two watery outings without checking them is pushing it ..
Also got some HD steering bars to go on .. and a few other bits to tidy up, grind off, stick back on!!!
Also got some HD steering bars to go on .. and a few other bits to tidy up, grind off, stick back on!!!
paddy700d
Active Member
This to my old disco....
In perpetration of it going into my 110.
I've done all the welding now and body schutzed it all too
Just need to do the timing belt on the 200 Tdi, then the engine swap, cavity wax the inner chassis, rebuild the brakes and change the other side (to the done side lol) radius arm bushes and mot it....EASY!!! I hope.
In perpetration of it going into my 110.
I've done all the welding now and body schutzed it all too
Just need to do the timing belt on the 200 Tdi, then the engine swap, cavity wax the inner chassis, rebuild the brakes and change the other side (to the done side lol) radius arm bushes and mot it....EASY!!! I hope.
