chunkymunky
New Member
That's one major back step!
That's one major back step!
At least I know that part of the Landy won't rust because I used good steel from a Vauxhall frontera
Last edited:
timtheenchanteruk
Well-Known Member
Won some new doors for it off fleabay. I love a bargain me, two passenger push button doors and one drivers door all with glass and in repairable condition for the princely sum of £3.20!!
Jammy sod!!!!!
Me, I got me decat pipe on
robint
Well-Known Member
concal
New Member
Replaced reverse light switch woohoo now have a set of functioning reverse lights....so whilst on a roll cracked bleed nipples on steering box :doh::doh::doh::doh::doh::doh:forgot to turn engine off!!!!!!
Now the engine bay has had a steam clean power steering fluid replaced three jobs in one afternoon now that's productive.
Now the engine bay has had a steam clean power steering fluid replaced three jobs in one afternoon now that's productive.
decided to clean up the chassis rails whilst the gearbox was out. What started a a couple of tiny holes. ended up like this.
No Clutch, Chassis rotten. :Cry: Am seriously thinking of ending it all..
And scrapping the fooker..
gotta be worth doing the welding though red.
Pikey
Dummy Ejection Facilitator..
gotta be worth doing the welding though red.
Don't have much choice, can't afford to scrap it,
Just one thing after another. I knew it would need a new chassis when I bought it. But didn't realise it was gonna fall apart before I could afford to buy a replacement.
Don't have much choice, can't afford to scrap it,
I knew it would need a new chassis when I bought it. But didn't realise it was gonna fall apart before I could afford to buy a replacement.
bugger,you have a welder though i take it??.
Pikey
Dummy Ejection Facilitator..
robint
Well-Known Member
Yes got a welder. Good job or I would be Fooked.
na ya wouldnt would of lent oops hired mine to you
Yes got a welder. Good job or I would be Fooked.
good job then,so tis only labour and a few bits then to fix so not the end of the world really.
waldershelf
Well-Known Member
Repainted my rear cross member and noticed a crack in the chassis coating just behind the rear offside bump stop. Cut out the rot, welded in a new piece, painted and waxoyled it.
I'm a bit ****ed off about finding more rot, in the summer of 2011 I went over the chassis with a fine tooth comb and repaired every bit of corrosion I could find. I then painted the outside with high zinc paint and waxoyled the chassis inside and out.
The paint and waxoyl on the outside still seems to be ok I think it has just rotted through from the inside despite the gallon of waxoyl that went in there .
Apologies for the photographic quality the camera on my phone is not very good.
I'm a bit ****ed off about finding more rot, in the summer of 2011 I went over the chassis with a fine tooth comb and repaired every bit of corrosion I could find. I then painted the outside with high zinc paint and waxoyled the chassis inside and out.
The paint and waxoyl on the outside still seems to be ok I think it has just rotted through from the inside despite the gallon of waxoyl that went in there .
Apologies for the photographic quality the camera on my phone is not very good.
Attachments
Last edited:
Decent evenings work......
rear end virtually finished....
rear diff pan refitted and sealed....
new cylinders, shoes n drums...
new rear brake lines made and fitted.....
Tommorow see's more work with a tin of black hammerite and a wire wheel..... its gonna be a long haul.....
cheers steve
rear end virtually finished....
rear diff pan refitted and sealed....
new cylinders, shoes n drums...
new rear brake lines made and fitted.....
Tommorow see's more work with a tin of black hammerite and a wire wheel..... its gonna be a long haul.....
cheers steve
Last edited:
discomark10
Well-Known Member
Decent evenings work......
rear end virtually finished....
rear diff pan refitted and sealed....
new cylinders, shoes n drums...
new rear brake lines made and fitted.....
Tommorow see's more work with a tin of black hammerite and a wire wheel..... its gonna be a long haul.....
cheers steve
Ooo shiny
