removed the top off my snorkel and had to recover it from middle of the Dorset undergrowth, oh well all in the name of seeking chippies :D
 
Disco was tramlining on motorway after fitting new tyres so had a look at it when I got home.
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.

Good job the weather is going to be fine:rolleyes::rolleyes:
 
welded the side tubes onto the roll cage, to save the roof over the doors (should of been done 12 months ago bit of a shutting the stable door after the nag has fooked off :rolleyes:)
 
discomark10 said:
what make was it... britpart by any chance?
Click to expand...

Lol. No idea. No labels or stamps on it? Hopefully this one will last longer. I think the seal behind the passenger side vent is damaged and water maybe getting into the motor. I never use the vents so will probably seal em up permanently to be safe. ;)
 
fitted decent seats and made the brackets for the middle seat after some carefull setting out with a coco-pops box

and fitted the fully reconditioned fuel dist pump ready for tomorows fun and games bleeding it up ( hopefully itll be 3rd time lucky )

and wired a new numberplate light on the arse end aswell as fitted a new temp sender unit

and couldnt resist fitting a brand new transfer box lever rubber boot

and then took ownership of a pair of 6" speakers that one of the neighbours was throwing out ( house speakers left for the bin men )

gonna get some more chipboard out in the morning and fortify the rear wheel arches in the tub and maybee concoct some sort of housings for the speakers :smokin:
 
landowner said:
Disco was tramlining on motorway after fitting new tyres so had a look at it when I got home.
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.

Good job the weather is going to be fine:rolleyes::rolleyes:
Click to expand...

Found I have the same problem:confused::confused: Is it a tough job? Maybe leave it to a professional??
 
're-profiled the year bumper so it now catches on the spare wheel when I open the door.
I also slightly 're-profiled the drivers door:rolleyes:
 
Got the good looking mechanic on it today. New suspension all fitted.
 

Attachments

  • IMG_9342 a.jpg
    IMG_9342 a.jpg
    61.1 KB · Views: 214
Done nothing cos it's tipping it down was ginna try n take prop off n try n sort clutch problem out with craigyb
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
468
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
562
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
824
Knappster
Knappster
I
Re-coding of ABS Module after repacement
Replies
10
Views
904
invisible999
I
C
Freelander 1 crank no start
Replies
1
Views
1K
niccage
N