:p:p
No point in damaging the motor unnecessarily. :rolleyes:

its just good to get out for the day - good food, good mates and good views. suites me, sir.

the ones we did today can be incorperated into the lot you did with us, think we now have enough to make up a days "soft" laning and a "hardcore" version too.
 
DSC00804.jpg


should see the fookin tree though :D
must get going on knocking up the front hoop and roof bars

I thinks its you that should have seen the tree:doh::doh::doh::doh:
 
finally got round to cleaning her out at long last. looking sweet now. stereo n speakers all up outta harms way. kits back together and back into bags. just need some kinda van vault thing now to lock it all away safe and im done!
 
Anyone got a 19J Injector pump? Undone the boost housing and it fell apart :eek: All stripped down now, just need a new pump :rolleyes:
 
Changed my Intercooler, fitted a new Map Sensor and tried to sort out the ferked driver's door window regulator by fitting a replacement - till I fcuked that up.. Got to order another one now. D'oh
 
jist finished painting replacement bulkhead and working oot how 300tdi wiring fits 200tdi wiring. So jist got to start strippin down the 90 to get its bulkhead oot.
 
Took me 110 to have its wheels tracked after changing the track rods and ends.....got pretty printouts and everything.....even drives better now and turns corners better.
 
Nothing today as i was busy spreading 20t of used tarmac over the drive.
Using it to go get a wacker from KB's tomorrow though.
Still not sorted the leaking transfer box or re-attached the front prop yet, bad times.
 
Took me 110 to have its wheels tracked after changing the track rods and ends.....got pretty printouts and everything.....even drives better now and turns corners better.

isn't there standard measurements for the rods? (between the centres of the rod ends) so yer make ther drag link XX inches long and yer steering arm XX inches long and bingo roberts yer mothers brother
 
Well, since I sold my Disco and got back from hols, I've been doing bits and bobs on the Defender to get it ready for the winter muddy season..

So far I've washed all the mud from inside, front and back and booked it in for a steam clean underneath..
other than that i've been playing around with chequer plate, fit my snorkel and straight through exhaust..

the chequer plate I did it the other day..
41115_10150246206645613_727855612_14344952_7259091_n.jpg


then repaired a little hole on the right chassi leg
44434_10150246156500613_727855612_14343746_4562019_n.jpg


46804_10150246171845613_727855612_14344204_6755234_n.jpg


then was time to play with the snorkel..
found a way of fitting it in with straight route for air intake and exit..
47744_10150249802005613_727855612_14449621_748398_n.jpg


then welded a plate on the water drain nipple
45464_10150249803435613_727855612_14449634_3871258_n.jpg


then after trying a few times for placemente, I've holded the air hoses in place with jubilee clips and then sealed around
47761_10150250442065613_727855612_14461638_529287_n.jpg


then finally, the postman delivered this shinny bit for me, so it was out with the old and in with the new...
48064_10150250383110613_727855612_14460317_6751574_n.jpg


the back box is out too...and tomorrow I shall cut it off and weld some pipe together.. :D

busy, busy!!
 

Similar threads