ooh i'm feeling a little bit chuffed with myself as i've done some adjustments to the rear door catch and it's not rattling at all - yet ..well silly not to try and mend it before i throw money at a new one eh!
Betsy washed after our trip up North , fast glass on all the windows , oil , power steering fluid levels checked and washer bottle filled.......well gotta have something to tinker on whilst i'm waiting for me apricot , nut and choccy flapjacks to cook aint eye ...:D
 
mudfever said:
ooh i'm feeling a little bit chuffed with myself as i've done some adjustments to the rear door catch and it's not rattling at all - yet ..well silly not to try and mend it before i throw money at a new one eh!
Betsy washed after our trip up North , fast glass on all the windows , oil , power steering fluid levels checked and washer bottle filled.......well gotta have something to tinker on whilst i'm waiting for me apricot , nut and choccy flapjacks to cook aint eye ...:D
Click to expand...

bout time yer did summat anyway.:rolleyes::p:D
 
Oi! you wind yer neck in ...:D
Go dig your old bus off yer drive and do summit with it eh ...cruelty to discos that is ...:p
 
gemsdad said:
not fair that aint.i walked past it and errr ignored it.what more does it need.:D
Click to expand...

some TLC wouldn't go amiss...
Right smarty pants answer me this .....we are looking at winch bumpers ...like the ones with combined A bar to protect the rad , BUT where the hell can the number plate go? as most with an A bar seem to be tubular and not square?
 
mudfever said:
some TLC wouldn't go amiss...
Right smarty pants answer me this .....we are looking at winch bumpers ...like the ones with combined A bar to protect the rad , BUT where the hell can the number plate go? as most with an A bar seem to be tubular and not square?
Click to expand...

brackets on the A bar.ner:D
 
Need to pick up a tad more oil to complete her service, but everything else is done, just engine filters etc. afternoon well spent tinkering :)
 
I've added cruise control switch and changed my steering wheel to one with controls, therefore cruise control fully functioning!

I also took apart my centre console (to find copious amounts of dog/horse hair from the previous owner!) and drilled out all the rivets holding the guard over the broken bias plate to replace it and then pop rivet it all back in!

All in a days work ey?!
 
Given it a blast of Waxoyl after pressure washing it yesterday, should help the chassis stay in one piece :rolleyes: :D
 
Looked at fitting a Peugeot power steering pump to a lexus engine in my 90
 
mudfever said:
some TLC wouldn't go amiss...
Right smarty pants answer me this .....we are looking at winch bumpers ...like the ones with combined A bar to protect the rad , BUT where the hell can the number plate go? as most with an A bar seem to be tubular and not square?
Click to expand...

Most tubular ones have spot light brackets welded to the a bar, can use a bit af angle iron or similar to fix number plate instead of spots
 
stripped the steering box off the disco, cleaned n painted it ready for fitting tomoz, pressure washed the underside of the tub, attacked it with a wire wheel , rust treated n waxoyld....

finally managed to fit the fuel tank and tank guard, fitted longer bolts to the chassis so i can remove the tank guard and tank seperately should i ever need to.....

its starting to come together at last :)

8707063349_a5e17a14ef_z.jpg


8708186122_d7f55ac012_z.jpg


8707064891_edd5c10c83_z.jpg


8708185702_bb2a01875b_z.jpg


cheers steve
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
834
BEASTIE 90
B
MinionKing
Freelander 2 (LR2) Freelander 2 Torque pull
Replies
11
Views
616
coltron1
C
stumpyj
TD5 Fuel line to fuel pump clip
Replies
10
Views
1K
Alan Henry Crossley
A
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
940
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
1K
Knappster
Knappster