elwood
Member
Replaced a headlight bulb in the Discovery.
Fitted some woodwork in the classic and fixed the electric mirrors.
Fixed a leak from the drain plug in the petrol tank in the Lightweight.
This involved emptying the tank into my sleeve first.
steve's landrovers
Fitted some woodwork in the classic and fixed the electric mirrors.
Fixed a leak from the drain plug in the petrol tank in the Lightweight.
This involved emptying the tank into my sleeve first.
steve's landrovers
SHORT ROUND
Active Member
thats the new suspension lift fitted back and front
easye1
Banned
nice mate..Fitted provisionally the new rover front seats and bled on it.
chunkymunky
New Member
Cheers. Bolted direct to seat box for now. Got some 50x20 box section being made into adapters. Will then use the old captive nuts so much easier to remove.
I have 80mx 60" olive green breathable waterproof fabric I won on eBay coming so once I have fitted the foam matts through out I will line the inside with that. Will be well smart and cosy too once the heated seat pads are wired in
chunkymunky
New Member
gemsdad
NOT BOTHERED.
it's raining quite heavy up here now,so the snow will be either all gone by the morning,or just a load of slush.
Dr_evil
Banned
it's raining quite heavy up here now,so the snow will be either all gone by the morning,or just a load of slush.
You's in the south of the north though
up in the north of the north we has snow at 8 inches
gemsdad
NOT BOTHERED.
You's in the south of the north though
i nose that,you are more than welcome to all that snow as well.
Dr_evil
Banned
I stripped me winch again to take pics and show what to do, see the post at http://www.landyzone.co.uk/lz/2372940-post62.html
Cleaned all the gaskets faces, rebuilt it and filled with with grease, then finally fitted it to the Disco, wired the solenoids up and put 'em in a plastic biscuit box (for now) to keep 'em together, ran a couple of wires to the battery and it all works .. I is now really quite happy!
Plan for tomorrow is to fix it all in place, spool the rope on nicely and wait till I've got the front hub re-fitted so I can properly test run it!
Cleaned all the gaskets faces, rebuilt it and filled with with grease, then finally fitted it to the Disco, wired the solenoids up and put 'em in a plastic biscuit box (for now) to keep 'em together, ran a couple of wires to the battery and it all works .. I is now really quite happy!
Plan for tomorrow is to fix it all in place, spool the rope on nicely and wait till I've got the front hub re-fitted so I can properly test run it!
blue beasty
Leaks an prone to bits dropping off
Reckon you should stick this up in the secure unit for a vote as a 'how to' though dunno what section....'General Landy chat' I guess
It is fun on a bun up here. Especially as I live on the correct side of the Pennines.
chunkymunky
New Member
My family were from the moors above bury. That's the right side
gemsdad
NOT BOTHERED.
good
well come and get this ****e from here as well,biiiiiiiiiiiiiiiiiig bucket and spade needed though.
