adrianwoolmore
New Member
Very new to Land Rovers. I hav a Discovery 2 on a W. The wipers front and rear plus washer jets, do not work when it is coldor damp, or freezing. I am told it is the motor, which I am not convinced. Can anybody help.And can you tell me how I accessthe wiper motor
DEFENDER90-DAZ
New Member
Fitted the new injector leak off pipe and removed the viscous fan 
gemsdad
NOT BOTHERED.
try asking this question in the discovery section,you might get a half sensible answer there.:bounce::bounce:
Yeah - it seems to have rained every day of my holiday!
The jobs on my D2 are just mounting
I have to clean out the red connector on the ecu (it still seems to be oozing out 3 years after I changed the gasket! Albeit only a small amount every few months now)
I've got to fix the heated windscreen connector that had previously burned out!
Sort out the fuel gauge problem (one minute its full, the next empty - as if it were a V8 RR)
Replace the bush at the bottom of the gear lever!
etc etc
And it still keeps raining!
The jobs on my D2 are just mounting
I have to clean out the red connector on the ecu (it still seems to be oozing out 3 years after I changed the gasket! Albeit only a small amount every few months now)
I've got to fix the heated windscreen connector that had previously burned out!
Sort out the fuel gauge problem (one minute its full, the next empty - as if it were a V8 RR
)Replace the bush at the bottom of the gear lever!
etc etc
And it still keeps raining!
johnlad
Well-Known Member
when you say gasket on ecu plug did you chang the injector wiring harnessYeah - it seems to have rained every day of my holiday!
The jobs on my D2 are just mounting
I have to clean out the red connector on the ecu (it still seems to be oozing out 3 years after I changed the gasket! Albeit only a small amount every few months now)
I've got to fix the heated windscreen connector that had previously burned out!
Sort out the fuel gauge problem (one minute its full, the next empty - as if it were a V8 RR
Replace the bush at the bottom of the gear lever!
etc etc
And it still keeps raining!
foxyjam
Active Member
Fitted my Christmas present. A set of led stop/tail lamps. Picture of one side fitted, no need to say which. A big improvement over standard and looks better.
First picture of tail and picture on the **** is of brake lights although camera doesn't tell much because of light level.
First picture of tail and picture on the **** is of brake lights although camera doesn't tell much because of light level.
Attachments
DEFENDER90-DAZ
New Member
foxyjam
Active Member
Sure does! They're from bolt on bits, they have an eBay shop. I've got front and rear indicators too but need to get they're rdx flasher unit to make them work. Going to get the led front side lights and rear number plate light too.
Also seen xenon HID conversion kits for font main lights too for about £30. Might give them a try too for that price
Also seen xenon HID conversion kits for font main lights too for about £30. Might give them a try too for that price
jai_landrover
Well-Known Member
All today to fit propshafts to the 80 inch, and fabricate the exhaust from lots of bits. aggrrhhhh!! ~Still have rear silencer and rear section to do!!!!
I hate exhausts!
I hate exhausts!
Wow BGB was right... You have swallowed a Haynes manual for Xmas... That's right what you need. Although unless you are lifting it loads and going for some good cross axle articulation then it ain't really an issue. Gotta spend a lot of money before you need to invest in stuff like that
Defender-Sam
New Member
Made a start on my wheel carrier,
Sam
Sam
NoOOO!
Yu pm'd me. I told ya not to do this ****! Yu aint listened. You have opened the gates of hell!!! :flame:. :behindsofa:
Grit Valve
2000 4.6 Vouge
You want help go to spam when offering your services
so if your shot blaster your using metal filings ? What do you use on the delicate parts ?
