rofwl
rofwl
Freediscoranger
Active Member
swaped the front prop for a nice new one with wide angle td5 yokes in 
very quick job since id had the old one off recently
very quick job since id had the old one off recently
blue beasty
Leaks an prone to bits dropping off
Andy Land
Well-Known Member
Name and Shame then ... someone on here?
Oldseadog
Well-Known Member
Unfortunately not someone on here, otherwise I would stand a chance of getting it back!
Anyone got a spare BOC portable TIG/MIG set or some Oxy/Acet gas bottles that they are no longer using? I still have the gauges, pipes, torch and filler wire ... All I need is some gas!!
Anyone got a spare BOC portable TIG/MIG set or some Oxy/Acet gas bottles that they are no longer using? I still have the gauges, pipes, torch and filler wire ... All I need is some gas!!
Freediscoranger
Active Member
new rear prop donut, this one lasted 3 months (britpart) on ebefore it lasted at least 2 years, had it on when i bought it, i hate britpart!!!
mikescuba
Well-Known Member
Mine has been standing buried under the snow for two weeks. This morning it was -13c.
I turned the key it fired up first time then stopped. Second turn of the key and it fired up again and carried on running. Think I will need to find that link about how to start a diesel engine. I must be doing something wrong.
I turned the key it fired up first time then stopped. Second turn of the key and it fired up again and carried on running. Think I will need to find that link about how to start a diesel engine. I must be doing something wrong.
Ninja Haggis
New Member
Do you think it started to go the 'way of the pear' when the words 'Looked Like' entered the equation ?
Fixed now ?
hsamson1947
New Member
what seemed like a missfire on discovery tdi 1998 , was infact water frozen in the fuel trap coming from tank ! NO hesitation / judder on acceleration now . -6 this am .
nick2303
Well-Known Member
relaced the plastic bleed plugs on stat and rad with brass ones,
topped up the coolant at the stat, as it was a tad low, only like 100ml..
heater seems a bit warmer now,,
put my a/t's back on cos i'm bored of the noise from the mudders..
swopped my rear springs over to see if it evens up the roll on cornering..
removed the rest of the uprights from the roofrack so its a flat one now..(as the tree removed the back last sat up hawes way.. looks way better,,
tried to weld the bottom stud back onto my spare wheel carried that snapped off when i tried to remove the wheel nut.. failed totally.. couldnt get any penetration with my little mig..
anyone near leeds with a disco 1 spare wheel carrier they dont need?
was gonna drain the coolant, new stat and new coolant but ran out of time.. gotta go to work at 6.30.. an not had my tea yet..
topped up the coolant at the stat, as it was a tad low, only like 100ml..
heater seems a bit warmer now,,
put my a/t's back on cos i'm bored of the noise from the mudders..
swopped my rear springs over to see if it evens up the roll on cornering..
removed the rest of the uprights from the roofrack so its a flat one now..(as the tree removed the back last sat up hawes way.. looks way better,,
tried to weld the bottom stud back onto my spare wheel carried that snapped off when i tried to remove the wheel nut.. failed totally.. couldnt get any penetration with my little mig..
anyone near leeds with a disco 1 spare wheel carrier they dont need?
was gonna drain the coolant, new stat and new coolant but ran out of time.. gotta go to work at 6.30.. an not had my tea yet..
doodle bug
Well-Known Member
Fitted a bearmach snorkal this morning ! bloody nightmare...
Cirrus
Active Member
Finally got my light bar on, front spots and new mud tyres ready for the bad weather today!
http://www.flickr.com/photos/7707130@N06/6817182481/
http://www.flickr.com/photos/7707130@N06/6817182481/
