bluehaze said:
Looks good - as I already had the td5 console, Phil made me the fasia so that I could fashion it to my taste.
Click to expand...

ah right i see good bloke and really helpful had a prob on the delivery side of things with mine and he sent another out without any arguements (the prob was the courier forged my signature and god knows what he done with the dash but i did'nt get it so as expected phil ain't using that courier again lol)
 
Today I changed the clutch master cylinder on the Defender 110 CSW 300TDi. I followed various instructions on here and on <cough>LR4x4</cough> and it was a doddle. Only instructions missing were to remove the bonnet-release from its bracket when moving the pedal cover, and that when removing the air-filter assembly it's an awful lot easier to reassemble if you remove the bottom pipe at the bottom end, not the air-filter end.
Bled the system as well as I could, then 150 miles north to see the partner's daughter for xmas. Bled it again there, as was a little spongey, had an excellent meal, then travelled all the way back home. It all seems fine now.

It's a good job I don't mind getting my hands dirty, but then if I did I suppose we'd never have bought a Landy... :D

On the A1 it was ****ing down, and there were no leaks? Is it faulty? :confused:
 
Last edited:
trying to remove the front brake caliper bolts from my 110.

Probably haven't been removed in the best part of 10 years... the bar stewards are welded on and totally rounded off...

GRRRRRRR :mad2: :mad2: :mad2: :mad2: :frusty: :frusty: :frusty:
 
nesponge said:
trying to remove the front brake caliper bolts from my 110.

Probably haven't been removed in the best part of 10 years... the bar stewards are welded on and totally rounded off...

GRRRRRRR :mad2: :mad2: :mad2: :mad2: :frusty: :frusty: :frusty:
Click to expand...
I used a set of bolt removers on mine! A good investment!:D
 
nesponge said:
trying to remove the front brake caliper bolts from my 110.

Probably haven't been removed in the best part of 10 years... the bar stewards are welded on and totally rounded off...

GRRRRRRR :mad2: :mad2: :mad2: :mad2: :frusty: :frusty: :frusty:
Click to expand...
Did you use a 12pt socket?
 
topped my d1 with fuel, played in snow in local supermarket yard :) it´s fun doing circles in snow!!!! with difflock...
 
nesponge said:
yup hammered a 12mm on there nice and tight... just spun on the bolt, no movement at all.

Going to try cutting a slice in it with a dremmel and getting the impact driver on it... but that's for tomorrow :)
Click to expand...
that was your mistake use 6point sockets and it won't happen
 
After fitting new shocks and springs and a few other bits like brake pads and anti roll bar joints at the weekend,thought i would give it a wash and brush up comes up good i reckon!
06122011226.jpg

06122011225.jpg
 
Fitted a clutch claw, now I can sleep at night...:D
Only prob is the flashing LED will keep the neighbours awake...:D:D:D
 
Installed a new 700 cca battery. The wife's car battery died so I put the one from my Rangie in her rice burner and bought a new one for the Green Beast.
 
picked up some oil and filters for a well over due change in the 110 teedeefive hopefully get around to it the weekend :rolleyes:
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
375
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
410
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
681
Knappster
Knappster
I
Re-coding of ABS Module after repacement
Replies
10
Views
729
invisible999
I
C
Freelander 1 crank no start
Replies
1
Views
1K
niccage
N