Littelwill
Well-Known Member
That was lucky!
if i look with squinty eyes its just like a disco 4 honest :lol:
cornish rattler
Well-Known Member
Tomorrow going to swap my new Terrafirma springs round that i fitted whilst fitting the kit last weekend but didn't know the springs was handed, anyway got to drop son off at work in crewe ( cheshire ) first then drive back home to swap them over 
Last edited:
blackstrat
Well-Known Member
:scratching_chin: Hmm I didn't know that.. maybe that's why my Disco's got a lean on it..Tomorrow going to swap my new Terrafirma springs round that i fitted whilst fitting the kit last weekend but didn't know the springs was handed, anyway got to drop son off at work in crewe ( cheshire ) then drive back home to swap them over
cornish rattler
Well-Known Member
Yeah i asked around before doing this and i was told they wasn't but after fitting i was told they are but i didnt have my reading specks with me at the time and apparently its stamped on each spring what goes where
mikescuba
Well-Known Member
Bite the bullet and ordered a set of Timken wheel bearings for the front. Decided as the weather has warmed up it's time to sort out this vibration problem which I think is coming from the front. I shall take it to my Landy guy and get him to strip the front axle and change wheel bearings, ball joints and diff oil seal and check to see if he can see any other signs of wear that might be causing this vibration.
cornish rattler
Well-Known Member
All sorted now then replaced my power steer belt and took some play out of my steering box, some more pic's of my new suspension after moving the springs around, going trying them out tomorrow at silverdale
Attachments
Last edited:
cornish rattler
Well-Known Member
I also cleaned mine with a pressure washer... Was amazed at the amount of mud that came off the underside considering where I've been in it
Then had a steering guard fitted
Need to do mine tomorrow after spending the day at Silverdale
Last edited:
blackstrat
Well-Known Member
Finally got around to fitting the HD rear bumper to the Disco.. was complete bar steward because the 6mm plate winch tray that I thought I was going to unbolt was actually welded to the chassis so I had to cut it off.. got there eventually..
darrenaroberts
Active Member
oh ****e.....
Finally got around to fitting the HD rear bumper to the Disco.. was complete bar steward because the 6mm plate winch tray that I thought I was going to unbolt was actually welded to the chassis so I had to cut it off.. got there eventually..
defenderdog
Active Member
Started it! Just got back from 3 weeks away and just had to get in and start it. Didn't have anywhere to go, but been reading Landy mags over the past week and now can't wait to start my rebuild shortly.
elliot0850
Active Member
Done a bit more work on the role cage. Rolled the light bar and made the other front part. Then got distracted and made a 15t
elliot0850
Active Member
Cart seem to put more than one pic on at a time. Maybe it's cus I'm using my iPhone.
