danny6801
Well-Known Member
FlyingPete
Well-Known Member
Replaced the speedo cable. The connector was broken at the speedo end and rattling around at the gearbox end. New one fitted and at last the speedo needle sits steady instead of bouncing around 
elliot0850
Active Member
Done a bit more work on the role cage. Finished the D hoop for the B piller and 2 connecting bars to the rear section. Slow progress but will be worth it when it's all done.
cornish rattler
Well-Known Member
My new Terrafirma lift kit came today and it looks great, can't wait to fit it hopefully if son isn't working on Saturday we can fit it then if not it will have to fit it when we are both off
Greenie85
New Member
Replaced the washer jet nozzle and removed the snorkel stripped it down and repainted it.
The Washer jet nozzle was a right pig of a job, I took someone's advice and tried to do it without removing the dashboard. I removed the ashtray and used the hole for access. Had to feed a spanner down into the hole and then fiddle around trying to remove the nut by touch. Not easy when you've got fat hands and there is a metal stanchion in the way!
I did learn that when removing the snorkel its important to remove the plastic clip holding the metal pipe to the flexitube before the two brackets holding it to the windscreen pillar. Otherwise it leads to trying to undo this clip while performing an interesting balancing act.
It didn't look like it had been removed or looked at since my Yreg defender was made.
The Washer jet nozzle was a right pig of a job, I took someone's advice and tried to do it without removing the dashboard. I removed the ashtray and used the hole for access. Had to feed a spanner down into the hole and then fiddle around trying to remove the nut by touch. Not easy when you've got fat hands and there is a metal stanchion in the way!
I did learn that when removing the snorkel its important to remove the plastic clip holding the metal pipe to the flexitube before the two brackets holding it to the windscreen pillar. Otherwise it leads to trying to undo this clip while performing an interesting balancing act.
It didn't look like it had been removed or looked at since my Yreg defender was made.
Last edited:
Mattie1967
New Member
Treated mine to a new and bigger battery. and it only just fits... 4mm spare next to rad...
Animal88
Active Member
broke the welds on my home mounted bull bars pushing a lesser 4x4 out the way in the yard. looks like the welder is coming out at the weekend for some beefing up of my front bumper. another busy weekend playing on my landy with breaks trailing arms and bumper oh well all good fun
Morganholidayman
Member
Nice little 20 min job to get the heater blower switches working consistently.
Removed the instrument binnacle and got switch cleaner into the contacts, awful cheap design!, then got a few dribbles of oil down the cable, awful cheap design! Works better now.
Removed the instrument binnacle and got switch cleaner into the contacts, awful cheap design!, then got a few dribbles of oil down the cable, awful cheap design! Works better now.
markSX
Active Member
Quite an easy jobs once you get past the thought of pulling the haft shafts out.
Had mine done in a couple of hours.
blackstrat
Well-Known Member
Taxed it and booked it in for some expert tinkering..
cornish rattler
Well-Known Member
Son bought and fitted a new bigger battery for the 90 but i havn't seen it yet but from what he says it seems to start quicker now
timc1967
Active Member
It was at this point about 20 years ago with my Series IIa that I realised this is serious and I didn't want to do the work on the landy myself any more.
