Reattached my CB aerial, its now drilled into the wing seeing as wales broke my mount...

Oh, and fitted new steering damper, I can now drive more than 45-50mph.
 
Reattached my CB aerial, its now drilled into the wing seeing as wales broke my mount...

Oh, and fitted new steering damper, I can now drive more than 45-50mph.

Might be a problem somewhere if you need steering damper on the road, mine dives without one and is fine even at motorway speeds, could be wear in swivel pins or summat:)
 
Fitted new in fuel/sender unit. Seems to run a bit better now without all the air being sucked in through the rusted pipes.
 
Reattached my CB aerial, its now drilled into the wing seeing as wales broke my mount...

Oh, and fitted new steering damper, I can now drive more than 45-50mph.

I presume you had to earth it to the chassis or something ? What thickness cable did you use. I have mine mounted on the roof rack and earthed to the chassis but I'm not too happy with it.
 
I collected 12 breeze blocks from the builders merchant. Think I might leave them in the Landy as it seems to run much quieter and smoother. No rattles or squeaks etc.
 
Drove it work and the exhaust & intake gasket split. Sounds like a steam train. Ordered one of those up pronto.


Also been ordering all its bits for a service. Overdue
 
jet washed at home,washed and wiped down with a microfiber towel,dont need a wax this time,checked tyre pressures,mot Tuesday and check underseal.
 
removed front suspension a rear shocks ready to replace with new stuff next weekend.

wire brushed, Kurusted and hammerited front lower shock bracket on axle and turret mounts.

Had an axle stand collapse :(. that made me crap myself when the front disk hit the concrete about 4 inches from me :eek: :faint2:
 
Last edited:
Stripped it down of all its goodies ready for painting and fitted my new puma bonnet.
 

Attachments

  • 20140921_151911.jpg
    20140921_151911.jpg
    316.2 KB · Views: 157
Nice, What colour you painting it bud?

I'm thinking black top and bonnet and silver body. Where is the best place for paint online and what is the best paint to use. Like the pic but with a black bonnet.
 

Attachments

  • Screenshot_2014-09-21-20-07-26.png
    Screenshot_2014-09-21-20-07-26.png
    454.1 KB · Views: 174
I'm thinking black top and bonnet and silver body. Where is the best place for paint online and what is the best paint to use. Like the pic but with a black bonnet.

Best paint to use in my opinion is 2k. But with all the health and safety bullsh*t that's your choice.
Doesn't bother me, My thinking is it's not like I do it every day.

Best place to get it. Well I buy all mine online/ebay. Autopaint brighton, Hugs paint and a few others depending what I want.
Or go to the local paint shop, I don't because I can't be arsed dealing with people in shops :eek:

Should look good by the way dude :)
 
Best paint to use in my opinion is 2k. But with all the health and safety bullsh*t that's your choice.
Doesn't bother me, My thinking is it's not like I do it every day.

Best place to get it. Well I buy all mine online/ebay. Autopaint brighton, Hugs paint and a few others depending what I want.
Or go to the local paint shop, I don't because I can't be arsed dealing with people in shops :eek:

Should look good by the way dude :)

How much paint did you use on yours for the top and body as I don't want to buy loads of the stuff.
 
changed these because it made it do this.:mad:
 

Attachments

  • 1462860_742296489186280_81065335181387785_n.jpg
    1462860_742296489186280_81065335181387785_n.jpg
    28.1 KB · Views: 201
  • 10616305_742296442519618_1896911133637575570_n.jpg
    10616305_742296442519618_1896911133637575570_n.jpg
    130.4 KB · Views: 142
Fitted handbrake and wired reversing light up to gearbox
 

Attachments

  • IMAG0014 (11).JPG
    IMAG0014 (11).JPG
    154.8 KB · Views: 152
  • IMAG0016 (8).JPG
    IMAG0016 (8).JPG
    218.9 KB · Views: 186

Similar threads