Teefin

New Member

• Jan 19, 2014

• #23,321

Changed leather gaiters and then caused myself a panic when lost power on trip.

Went to change gear crunch sound and then nothing stopped scratched head selected low box everything ok selected high box and away I went no probs 100 mile round trip. Remembered when fitting the transfer box gaiter I had moved the lever which is really stiff I think I haven't fully engaged it in high before setting off and hey presto issues I got. I hope that is all it was anyway and hope no damage cause for the few 100 m it took to get to a stop.

 

D

discokev595

New Member

• Jan 19, 2014

• #23,322

found out where the leak is on my power steering pipe, looked at the noisy fan belt and put air in tyres.

 

PCR

Member

• Jan 20, 2014

• #23,323

Put the trailer number plate in the side box in trunk, ready in case I need it !

 

discomark10

Well-Known Member

• Jan 20, 2014

• #23,324

nothing... got ****ed off after failing at doing some calculations, then ####ing up breakfast as I had almost no sleep.. so went back to bed lol

 

bigvinnie

Active Member

• Jan 20, 2014

• #23,325

Found more of my drive shaft clunking , thats shagged me thinks

 

Attachments

• 
  20140120_095237_5.jpg

  268.7 KB · Views: 160
• 
  20140120_095246.jpg

  269.4 KB · Views: 146

200

Active Member

• Jan 20, 2014

• #23,326

Stoged a patch on the front off side outrigger. Wanting to get a new chassis later this year so a stoge job was good enough.

 

mikescuba

Well-Known Member

• Jan 21, 2014

• #23,327

Fitted a new light & horn stalk switch on the steering wheel. Typical made in China replacement didn't fit. Had to grind part of the holder off.
Also fitted a new temperature sender unit. Third on in two years. This time this one didn't come in a blue box so I have high hopes.

 

KeepDigging

New Member

• Jan 21, 2014

• #23,328

Driven it to work - a bit unusual for me but it was too slippery for my usual transport - and consequently discovered that the handbrake is unadjusting itself AGAIN, with the MOT appointment set for later in the week

 

G

Grebby

Active Member

• Jan 21, 2014

• #23,329

Collected a nice new front prop shaft

Hope I can fit it tomorrow.

 

Chrisw8

Well-Known Member

• Jan 21, 2014

• #23,330

Got gearbox, transfer box oil changed, and got prop shaft u/j's greased.

 

Brown

Well-Known Member

Full Member

• Jan 21, 2014

• #23,331

I took my spare wheel carrier off again and filed the bolt holes in the bottom hinge into a slot shape so that I'd got as little more adjustment. Bingo. It sits at the right height to connect to the back door now. I've also cleaned the chassis a bit more by applying he pressure washer to all the doles to hose the dirt out from inside. I'll leave that to dry for a few days and put some more Dinitrol on at the weekend. I began drilling out some of the sheared bolts on the fuel tank plate, but it was not going well so I knocked the captive nuts off with a hammer and chisel and put real nuts and bolts on instead.

 

Dr_evil

Banned

• Jan 21, 2014

• #23,332

 

xtreaclex

New Member

• Jan 21, 2014

• #23,333

What have I done to my landy today??? Well I kicked it....then swore at it for hurting my foot lol

 

the_wolf

Well-Known Member

• Jan 22, 2014

• #23,334

Doc every time I see that it never seems to be any different and is always covered by a tarp. How's it coming on?

 

Dr_evil

Banned

• Jan 22, 2014

• #23,335

The tarps just there because I haven't been arsed to remove it since putting the roof on

Heres a paste over from my build thread;




Anyway after a few hours of toiling and struggling in the ****ing wet I got the axles completed and three of the four brakes un stuck. Passenger front one is still seized up but a little tug forward with the disco should free it up


Anyway some progress pics

Front RRC axle rear Series axle

That stance!

Rear axle off

Original rear width Vs. new

**** wet through at this point but two pics of it complete

 

the_wolf

Well-Known Member

• Jan 22, 2014

• #23,336

Ooh nice wheels and tyres. They look a bit out of place, sure you don't wanna sell em to me? £12.50 and a burger king of your choosing

 

Dr_evil

Banned

• Jan 22, 2014

• #23,337

Don't think they'd fit on your little 90 They'll look a bit more in place once I make up some nice big wheel arches.

Gonna go for a boxy style like on quarry wagons

 

the_wolf

Well-Known Member

• Jan 22, 2014

• #23,338

As long as they don't look too overkill. And I think you'll find that those tyres would look fantastic on my 90, it'll be just what it needs. That and paint

 

Dr_evil

Banned

• Jan 22, 2014

• #23,339

This whole thing is overkill the arches are just to get it through the MOT.....that and plastic ones look ****!

 

KeepDigging

New Member

• Jan 22, 2014

• #23,340

Booked it in for its MOT.

Rear seats, spare wheel etc. removal tonight and then I guess I'll find out how bad the rest of it is tomorrow.