a2dds · Jan 23, 2014

discomark10 said:
Have you checked all the pipework? Migh have a small hole

I have indeed, no sign of leak, and for a metal pipe it would be pretty obvious, only one bit of rubber in the hydraulic system and it didn't look perished at all.

a2dds · Jan 23, 2014

jamesmartin said:
google 591231g and 550732g i found as good as you get ,but even so some faulty parts arent unkown

Thanks very much mate, i shall blame you when they break again

I cant see how the master cylinder broke after 6 months of use. What a pain

gemsdad · Jan 23, 2014

a2dds said:
Thanks very much mate, i shall blame you when they break again

I cant see how the master cylinder broke after 6 months of use. What a pain

the master cylinder can be badly made,this might result in the seal's leaking etc.was it a blue box one.

discomark10 · Jan 23, 2014

What model is yours. I got a lockhead slave that I brought but was the wrong thread for mine.

a2dds · Jan 23, 2014

gemsdad said:
the master cylinder can be badly made,this might result in the seal's leaking etc.was it a blue box one.

i got a blue box one first, it leaked the moment i fitted it, worse then the one i was replacing, then got a trw one or what ever they are all. Slightly more expensive.

a2dds · Jan 23, 2014

discomark10 said:
What model is yours. I got a lockhead slave that I brought but was the wrong thread for mine.

tis a 1989 90, LT77 gearbox, got a 200tdi in it, so i think they were the right parts

truckerkev65 · Jan 23, 2014

just gave the old girl a service

SteNova · Jan 23, 2014

I fitted seats in the back

IMG_4402[1] by Ste_Nova, on Flickr

the_wolf · Jan 23, 2014

Disco seats? How did you do it? I had a look at the side facing ones but considered it too much of a carry on so i opted for the forward facing disco seats

MR BFG · Jan 23, 2014

Just changed the lift pump in my lunch hour, hopefully this fixes the air in the fuel system and makes her run a little sweeter.

dominicbeesley · Jan 23, 2014

Yay! Got to use 4wd for all of a quarter of a mile in a hail storm...then got beeped at for stopping to disengage

discomark10 · Jan 23, 2014

a2dds said:
tis a 1989 90, LT77 gearbox, got a 200tdi in it, so i think they were the right parts

What i was saying is its going spare if its of any use!

haighy2 · Jan 23, 2014

re-trimmed the gear gaitors

a2dds · Jan 23, 2014

discomark10 said:
What i was saying is its going spare if its of any use!

Oh you had the parts? I missed the point.... I'm i being thick?

discomark10 · Jan 23, 2014

a2dds said:
Oh you had the parts? I missed the point.... I'm i being thick?

Yes lol.. I have an exta lockhead slave cylinder which is of no use to me. Its new. Would you like to take possession of it?

SteNova · Jan 23, 2014

the_wolf said:
Disco seats? How did you do it? I had a look at the side facing ones but considered it too much of a carry on so i opted for the forward facing disco seats

I got brackets made

Kev@kenninghall · Jan 23, 2014

Handbrake fully refurbished and ready for fitting to the new transfer box. Much easier job when it's off the car and on the kitchen table

Kwakerman · Jan 23, 2014

Kev@kenninghall said:
Handbrake fully refurbished and ready for fitting to the new transfer box. Much easier job when it's off the car and on the kitchen table

Until SWMBO finds out

Kev@kenninghall · Jan 23, 2014

Kwakerman said:
Until SWMBO finds out

She knew. I get away with a lot

Chrisw8 · Jan 23, 2014

Kitchens for Gearboxes,
Dining Rooms for Engines.

*simples*

Active Member

Active Member

NOT BOTHERED.

Well-Known Member

Active Member

Active Member

New Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

New Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads