scottant
New Member
fixed (read bodged) a few niggling problems with the disco today. The pin for the rear door stay has rusted away alot, which given there is little rust anywhere else is annoying, but there was nothing keeping the door stay on the pin. 30 seconds later and with the aid of a lump hammer, there is a nice shiney 17mm nut to hold it in place 
also the drivers side washer jet was clogged up, so I removed it and plugged it into my bike track pump. took 100psi roughly to clear the crap out of it. works a treat now!
also the drivers side washer jet was clogged up, so I removed it and plugged it into my bike track pump. took 100psi roughly to clear the crap out of it. works a treat now!
Last edited:
:nopics:
gemsdad
NOT BOTHERED.
Made the patches for BB to weld onto me 110 and fitted me dog guard.
12" by 5"
which unfortunate bit of machinery is now missing that.
Pikey
Dummy Ejection Facilitator..
We has a very good relationship with local fabricators. Where they let us raid their skip everytime we need some metal. Have got a decent stack of "bits" some as big as 6ft by 8". but most around 12" to 24" in size, of varying thicknesses from 1.0mm to 10mm thick. they are a godsend at times like this. We've even had a set of steel shelves out of their skip. That they were throwing away.which unfortunate bit of machinery is now missing that.
gemsdad
NOT BOTHERED.
We has a very good relationship with local fabricators. Where they let us raid their skip everytime we need some metal. Have got a decent stack of "bits" some as big as 6ft by 8". but most around 12" to 24" in size, of varying thicknesses from 1.0mm to 10mm thick. they are a godsend at times like this. We've even had a set of steel shelves out of their skip. That they were throwing away.
i remember you telling us about that a few weeks ago,nice thing to have innit.
blue beasty
Leaks an prone to bits dropping off
i remember you telling us about that a few weeks ago,nice thing to have innit.
Put a bit of business their way and always offer to pay for what we rummage out their skip.....they always say 'don't worry'
Mind you we might be better of welding the skip to the underside of Pikeys Landy....
gemsdad
NOT BOTHERED.
Put a bit of business their way and always offer to pay for what we rummage out their skip.....they always say 'don't worry'
Mind you we might be better of welding the skip to the underside of Pikeys Landy....
just bolt his engine/gearbox and axles to the skip.
We has a very good relationship with local fabricators. Where they let us raid their skip everytime we need some metal. Have got a decent stack of "bits" some as big as 6ft by 8". but most around 12" to 24" in size, of varying thicknesses from 1.0mm to 10mm thick. they are a godsend at times like this. We've even had a set of steel shelves out of their skip. That they were throwing away.
Nice.
My bro worked at a fabricators so it used to be easy for me to get 'stuff' too .. he made my fence and got me the steel for me rocksliders/sills, but he's now been made redundant and is working as a gardener .. can't see me needing flower seeds anytime soon!
DIFFLOCK66
Well-Known Member
Broke the nearside indicator lens laning today
Diff.
Diff.
blue beasty
Leaks an prone to bits dropping off
After several weeks of saving I finally managed to fit an important new upgrade.....
Meet Charley Carrot
Meet Charley Carrot
chunkymunky
New Member
Well i should have been getting it ready for MOT wednesday but tipping it down. Side light is disconnected. B reg 90 . Will it matter?
another forum
Active Member
bugger all.....2 weeks welding and a week and half of other jobs for the mot,of which it passed on friday....so i took a breather
chunkymunky
New Member
Eek
chunkymunky
New Member
Its up for sale soon as got mot too
