Took her "greenlaning" (unclassified county road marked as an ORPA). It was awesome! Will post a thread in the 'laning section.

Diff.
 
sorted loose key barrel on drivers door which had gradually been working its way out. Being as I'd got the door card off I sprayed everything with WD and lubed the winder mechanism which had been literally winding me up (no pun intended ) every time I lowered the window it juddered down rather than a nice smooth action, marginally better now.
 
badadj said:
sorted loose key barrel on drivers door which had gradually been working its way out. Being as I'd got the door card off I sprayed everything with WD and lubed the winder mechanism which had been literally winding me up (no pun intended ) every time I lowered the window it juddered down rather than a nice smooth action, marginally better now.
Click to expand...


Rub some Swarfega into the felt channels at the side of the glass ...:cool:
 
Swapped out the rear lights for ones with indicators in -

Can then take the rear bumper off and still move it around safely ... :D
 
mikescuba said:
Mine was putting out a bit of black smoke when under load. Changed the air filter which seemed to sort out the problem, but just for good measure I changed the diesel filter and ran some injector treatment through it. Job done.
I love Land Rovers, so easy to sort out.
Click to expand...

I hate Land Rovers, just sorted one thing out and another comes to light.
I have a whistling sound coming from the turbo somewhere. It comes when the turbo kicks in under load. Can't find any leaks when I rev the Landy up and it's stationary. Think I have also lost a little power when going up hills.

I suppose I will have to wait till it becomes more obvious before I will be able to find the leak.
 
Last edited:
Picked up my fuel tank from the shot blasters.

C12A24B5-97A1-40F9-8CCE-E12A9F38A3E5-18138-000010B2688AC518_zpse42184c3.jpg


E638A434-5617-4280-A171-6DEFE4D15A88-18138-000010B24BE199F3_zps4fa1cdde.jpg
 
Picked up some gearbox mounts and me new engine mounts have arrived :D


for £36 posted I cant complain really…….woulda taken me a while to make up and these have been CNC folded so sit perfectly :)
 
Dr_evil said:
Picked up some gearbox mounts and me new engine mounts have arrived :D


for £36 posted I cant complain really…….woulda taken me a while to make up and these have been CNC folded so sit perfectly :)
Click to expand...

I cant complain really: that is a rare occurrence.:rolleyes::D
 
With the help of all you wonderful people on here, I sorted the Three Amigos on my Disco 2. New SVS fitted with no problems.
 
Started stripping bits to replace a footwell and found more rust. This led to more stripping and more rust :(

The rusty footwell is starting to look like the best bit!


Sent from my iPhone using Tapatalk 2
 
Opened the drivers side window, heard a clunk, couldn't shut it again! Storm on the way, stripped the door card and window mechanism in a field, managed to get the motor to operate again and the window to shut just before the rain!

Daren't open the window as it might not shut again. Off to look for a "how to fix it"
 
Headtester said:
Opened the drivers side window, heard a clunk, couldn't shut it again! Storm on the way, stripped the door card and window mechanism in a field, managed to get the motor to operate again and the window to shut just before the rain!

Daren't open the window as it might not shut again. Off to look for a "how to fix it"
Click to expand...

door wedge :).
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
647
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
926
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
591
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I