DastardlyDan · May 24, 2015

I took mine off... with some tin snips, and pliers....

Winu · May 24, 2015

baptista said:
so now you have to remove 8 screws instead of 12...
that does not seem so much improvement besides when you remove the whole sump access is much better. But fine for me if it works for you.

I got 4... and access to all stuff on underside

pardec · May 24, 2015

Oil and filter change.

Treated the exterior plastic to a couple of coats of forever black

guineafowl21 · May 24, 2015

Put a new AP clutch in our 02 Td4. Not a job I'd want to do every day! I might hire an engine hoist and drop the engine out if I have to do it again.

GrumpyGel · May 25, 2015

Put the battery on charge. Has our first frost of winter a couple of days ago and this morning there wasn't enough juice to turn the motor over. Should I bother charging it, or just bite the bullet and replace it? Can't remember if/when we've replaced it.

digby · May 25, 2015

Hi grumpy

Frost in Christchurch ...... Looks like we left at the right time

I lived with a lazy battery for a couple of years - changed it this year now it's perfect

lenny1234 · May 25, 2015

Finally replaced the 'repaired' brake switch with a new one - intermittent twin amigos..

kourgath · May 25, 2015

Done some interior changes. Can you spot the differences?

lenny1234 · May 25, 2015

kourgath said:
Done some interior changes. Can you spot the differences?

You switched the ignition off?

kourgath · May 25, 2015

lenny1234 said:
You switched the ignition off?

Damn, forgot to plug it all back in

NeilTD4 · May 25, 2015

Replaced the vacuum hose that runs to the EGR solenoid, bit of a fiddle getting the new one on the solenoid mostly by feel…

Managed to route the hose better so it shouldn't rub on other bits and pieces…

Washed it too!

kourgath · May 26, 2015

kourgath said:
Done some interior changes. Can you spot the differences?

It took less than half an hour for the chrome rings, but nearer 2 hours for the RonBox switch (plus all the swearing). Trying to fit the cable from the switch through the bulkhead

eventually got it through where the bonnet release cable exits.

Dangermike · May 27, 2015

Crashed it...... Some old man drove across all the parking bays straight out in front of me....

ImageUploadedByTapatalk1432755099.320257.jpg

GMC85 · May 27, 2015

Done my annual filters change. Oil change and new MAF sensor scheduled for Saturday weather permitting

ach2 · May 28, 2015

Had oil and filter change + MOT..... it passed with only 2 advisories

2 back tyres have only 3mm tread - was going to change these anyway, and rough running at idle. I have iCarsoft i930 which tells me this is injector 1 (P0263). Really urprised it passed as it billows out white/blue smoke when cold (smells of unburnt diesel).

Anyway, happy it passed.....

DastardlyDan · May 28, 2015

Dangermike said:
Crashed it...... Some old man drove across all the parking bays straight out in front of me.... View attachment 72055

Looks similar to how mine does tbh :lol:

kourgath · May 28, 2015

Dangermike said:
Crashed it...... Some old man drove across all the parking bays straight out in front of me.... View attachment 72055

Bu&&er

Doesn't look that terminal so I hope it gets fixed and Winston Wolf makes the old geezer 'disappear'

Dangermike · May 28, 2015

kourgath said:
Bu&&er

Doesn't look that terminal so I hope it gets fixed and Winston Wolf makes the old geezer 'disappear'

Hope it's just the bumper , and spot lights the other car was a lot worse off!

NeedleNose · May 28, 2015

Doesn't look too bad, hopefully just the bumper that's pushed the bonnet up. It's a big empty space behind that dent in the bumper so may be lucky.

Freelanders are surprisingly tough, had an accidental side swipe with a BMW X3 a month or so ago. Big dent in his front wing and maybe a crease on the bonnet. Mine had a bit of black BMW paint on the rear plastic arch.

Dangermike · May 28, 2015

NeedleNose said:
Doesn't look too bad, hopefully just the bumper that's pushed the bonnet up. It's a big empty space behind that dent in the bumper so may be lucky.

Freelanders are surprisingly tough, had an accidental side swipe with a BMW X3 a month or so ago. Big dent in his front wing and maybe a crease on the bonnet. Mine had a bit of black BMW paint on the rear plastic arch.

Yup they are quite resilient!

Active Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Active Member

Member

Attachments

Active Member

Member

Active Member

Member

Active Member

Member

Member

Active Member

Member

Active Member

Active Member

Active Member

Similar threads