Epicuser

Ex Freelander Owner

• Nov 6, 2013

• #2,101

Plugged in a Scangauge11

 

IndiTd4

Well-Known Member

• Nov 6, 2013

• #2,102

epicuser said:

plugged in a scangauge11

Click to expand...

and??????

 

Kizzeh

Well-Known Member

• Nov 6, 2013

• #2,103

Bulb went out in dashboard. Hit dashboard. Light works.

 

bushwwacker

Well-Known Member

• Nov 6, 2013

• #2,104

Nowt.

 

Freelaner

Landy Driver

• Nov 6, 2013

• #2,105

I drivved it to work and left it there, cos i'm bound for cambs int morning.

i have the company van

 

D

davef2901

New Member

• Nov 6, 2013

• #2,106

Took dogs (& wife) to seaside for a change. No mud to play in. Dogs happy. Thinking about taking wife's RAV4 to bits cos I'm bored. Actually, I think the MAF & throttle body are due a good clean, so I'll annoy her by doing that.

 

Epicuser

Ex Freelander Owner

• Nov 6, 2013

• #2,107

IndiTd4 said:

and??????

Click to expand...

Discovered that the engine temp is only 69c.

I need a new thermostat. I have a Gates one on order.

 

Spacemonkey...

Well-Known Member

• Nov 6, 2013

• #2,108

Drove to work and back. 3.5 hours there, 2 back. Joy...

 

Skynet

Well-Known Member

• Nov 6, 2013

• #2,109

Tried to get my Bluetooth OBDII reader to talk to Torque Pro app on my tablet.... keeps losing connection grrrrrr

 

Spacemonkey...

Well-Known Member

• Nov 6, 2013

• #2,110

Ah, I've heard about that one. Let me know if it's any good if you get it working... Does same as Scanguage doesn't it?

 

Epicuser

Ex Freelander Owner

• Nov 7, 2013

• #2,111

Spacemonkey... said:

Ah, I've heard about that one. Let me know if it's any good if you get it working... Does same as Scanguage doesn't it?

Click to expand...

Sounds like it. Not aware of one that works with iPhone/iPad yet. But I may have missed something as they are supporting more hardware. About time too.

 

bukko

Well-Known Member

Full Member

• Nov 8, 2013

• #2,112

Epicuser said:

Sounds like it. Not aware of one that works with iPhone/iPad yet. But I may have missed something as they are supporting more hardware. About time too.

Click to expand...

I bought this and this.

Will let you know how it works.

 

Epicuser

Ex Freelander Owner

• Nov 8, 2013

• #2,113

bukko said:

I bought this and this.

Will let you know how it works.

Click to expand...

Looks interesting. Keep us posted.

 

Barry6690

Active Member

• Nov 8, 2013

• #2,114

Eventually got round to sorting out the sump Guard I got off Dunc, many thanks mate.

cleaned



primed,



painted,



will post pic when fitted.

 

bukko

Well-Known Member

Full Member

• Nov 8, 2013

• #2,115

How much does it weigh, approx?

 

edwardcraney2012

Active Member

• Nov 8, 2013

• #2,116

You got a green outline of an undertray on your wall now?

 

duncanpage4

Active Member

• Nov 9, 2013

• #2,117

I fitted the lift kit to the rear shocks.
Was a b**ch to get the strut released to drop down enough to get the kit in. Lots of WD40, swings of the hammer & a few stern words & they eventually let go!
Doing the fronts tomorrow.

 

bukko

Well-Known Member

Full Member

• Nov 9, 2013

• #2,118

Are you gonna do the fronts as well or leave it in dragster mode?

 

Spacemonkey...

Well-Known Member

• Nov 10, 2013

• #2,119

Blimey, someone torched your car mate?

I assume it was just sticky to the bodywork at the top mount..?

 

bukko

Well-Known Member

Full Member

• Nov 10, 2013

• #2,120

Serious questions:
Are those 40mm and did you only have to undo the top of the strut, or did you need to undo the bottom as well?