I'm not sure if its tar based - its rock hard little dots.

Been to busy cutting trees today to get the lawn mower out, so haven't tried petrol.

Will get to it in the week.
The tar stuff is just an example of some of the soak in stronger cleaning chemicals available that wont strip the paint/lacquer if used correctly. Tree sap is simular in nature. Other stuff available in the range.
 
Is it actually quick? Compared to the ICE?
It's hard to compare as I've only driven up the lane but probably similar or a little quicker than if you were to rev the ICE car hard and dump the clutch.
I think there is less weight on the front of the car so it will spin the wheels easier, when I get the prop shaft back on I'll know better. ;)

There was a funny noise coming from the back of the car like something in one of the wheels was catching so I didn't do much more.
 
Why not just get on with the bits like brakes and other stuff you'll need for a complete conversion, which should take you up to spring. ;)

What are you doing with the test mule once you've taken the EV bits back out?
Good idea, I can move the EV out of the garage for a few hours or a couple of days at a time while doing this.
I just need to work up the enthusiasm to start on it. Once I get started I'll be fine but that's typical of me.

The test mule will be stripped of anything I think is valuable or useful and sadly will be scrapped. :(
I already have too much rubbish around. :oops:
 
Just watched Mr Furious Driving n YouTube - now quivering in fear that the rot in my hippo is more expansive than I feared!!!

I need to learn welding, so fingers crossed it gets through MoT now and I’ll tackle any tin worm when the weather dries…
 
Just watched Mr Furious Driving n YouTube - now quivering in fear that the rot in my hippo is more expansive than I feared!!!

I need to learn welding, so fingers crossed it gets through MoT now and I’ll tackle any tin worm when the weather dries…
I hadn't seen his videos before but this one was a bit concerning. I'll take a look at mine to see how bad it is.
 
Nothing too obvious on the external sills on mine - but I know the seam was crumbling… I’ll take the plastic covers off when the weather gets warmer - and perhaps aim to leave them off…

can you get rock sliders? Might be a good thing to add if welding sills anyway?
 
Is it actually quick? Compared to the ICE?
Smokey!! It reminds me of a k1.8 running FWD, although without the engine noise.
In theory it'll be much faster than any of the 4 cylinder variants, and probably faster than the V6 too.

It's rather strange hearing the tyres complaining, without any accompanying engine noise.
 
Smokey!! It reminds me of a k1.8 running FWD, although without the engine noise.
In theory it'll be much faster than any of the 4 cylinder variants, and probably faster than the V6 too.

It's rather strange hearing the tyres complaining, without any accompanying engine noise.
It might be quicker up to 30 or 40 but not sure about higher speed.
We'll see. ;)
 
Helped a local guy out with his FL1. He is now familiar with the CCU operation of the rear door, window, wiper and tailgate lock as well as fitting a new tailgate window regulator. Also, more importantly the One Wheel Up Test !!

Has just bought a 2004 TD4 and has joined Landyzone as he is impressed with the information!!

His user name is @Sithmaull - so a big welcome. I told him it was a great forum, so please be kind !!
 
Thank you Andrew,

Just want to say that it was a pleasure to meet you today and were very thankful for your honest advice, knowledge and assistance with the fl1.

If anyone here needs help then andrew is a godsend, his website is https://www.alwmotorvehicleengineering.com, he has an amazing workshop and spares galore. I will be paying him a visit again soon to get other bits of the landy sorted.

I would also like to say a big hello to everyone on here and look forward to being a part of the forum.

Thomas.
 
If the spots are oil based (like tar) petrol works a treat, otherwise I guess something like washing up liquid.
The tar stuff is just an example of some of the soak in stronger cleaning chemicals available that wont strip the paint/lacquer if used correctly. Tree sap is simular in nature. Other stuff available in the range.
Finally got round to mowing the lawns today.

I'd used the last of my bottle of 2 stroke oil for the weed eater/strimmer last time, so first off went to my cupboard of "fluidly stuff" cos I was pretty sure there was another bottle in there that I used for the outboard motor. Sure enough found it.

Thought I'd have a rummage around and see what else was in there and found a bottle of tar and whatever remover. Probably been in there at least 10 years.

Gave it a go and it removed the spots reasonably well. The bigger ones came off easy, but the smaller ones took some budging. Took a while leant over the bonnet in the afternoon sun putting in quite a bit of elbow grease.

So I was knackered and the lawns still aren't done - but the bonnet looks much betterer.
 
Lawns? Plural???
Lots of people have front and back lawns, its not that unusual.

Our section is only 1/4 acre, and the way the section is laid out we have 3 separate lawn areas, the front lawn, 'back' lawn which is more of a side lawn, and 'the meadow' around the other side - so called because I often can't be bothered to cut it until its a fire risk!
 

Similar threads