chrish2012 said:
Not too sure how to attach a link to ebay but hopefully from this you should be able to find the bulbs.

2 PCS 1156 BA15S 12W 4 CREE Q5 Car Wedge LED Reverse Lamp... (130822550099)
Member ID fiveseason88
Click to expand...

yep that worked...cheers ;)

are they brighter than the standard ones?
 
Fitted rubber spacers along the back of the Mantec sump guard to stop the creaking noise, seems to of worked. :)
 
I did the final hose-tweak on my EWP system which is now working nicely. I blanked off the bleed hose that normally comes off the head and ran a hose from the inlet manifold to a T juntion in the header tank feed hose.

Just need a good thrash now to clear all the air out :).
 
Garboy88 said:
Well I drove to work and as I pulled up outside the brake pedal hit the deck and there was a big grinding noise! So I took it inside, took the front wheels off and the brake pads had turned to dust! Lol there was nothing left on them! Lol

So I bought new pads, took the calipers off and loads of broken pad fell out! Bloody thing! Under further inspection the disks are fecked and the piston on the caliper is rusted to hell and back so I've ordered new calipers and disks, there arriving tomorrow dinner time so change it all over then :) I'll put some pics up tomorrow
Click to expand...

.
 

Attachments

  • IMAG0393.jpg
    IMAG0393.jpg
    553.2 KB · Views: 224
Had to remove the Track arms today to free the track rods as they were seized while car was in the air i took the time to decat aswell :)

once all that was done i took it back for the tracking to be adjusted
 
Just done the de egr mod! Didn't bother cleaning the inlet out it was pretty god damn clean! Surprising as its on 90k
 
re roof rack ..
saw this one at another forum ( see atached pic )
 

Attachments

  • fl_roofrack.jpg
    fl_roofrack.jpg
    83.6 KB · Views: 2,166
fitted a new upgraded header tank and lid which arrived today.

and new side lights

then done 80 mile on some of the crappiest roads in northumberland
 
Replaced coolant reservoir.

Still leaks though (see dribble stains on image).
 

Attachments

  • IMG_0215_small.jpg
    IMG_0215_small.jpg
    153.5 KB · Views: 270
pardec said:
that looks good.................want one
Click to expand...

Yeah, like the look o that roof rack! Weather took a turn for the better today in these parts, bit warmer and some sun. Anyhoo, ditched my blanking plate and refitted the drive sprocket pinion thing. Tbh was dreading this as had a go before and had to abandon when the bleddy thing wouldn't go back in. Looks easy and straight forward but nothing ever is. Still its back on now, along with mass damper so I'm close to being 4x4 again - big relief whether I sells her or not - yes sudden doubt about my plan, having spent plenty time and dollar on the old girl bla bla!! Fitting the blanking plate has no reason to it that I can remember, so don't bother!:)
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
676
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
265
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
745
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
634
Hippo
Hippo