Co-Pang-Yang · Apr 14, 2017

After the joy of yesterday's central locking sucess I thought I'd get really technical.

From this:

To this:

Because this has stopped working

Started unbolting stuff

Tried too hard

Too short and bugger all wire still attached

So replaced it with new bolt and extra washers

Motor out for a bit of light sanding of contacts:

Bushes, one of which was siezed solid.

Freed it off, sprayed up and all put back together

It's works!!!!

And all back together with rope back on for the first time in months.

private penguin · Apr 14, 2017

Back home from an evening out and had to go and do another video in the dark

Also new dashcam ordered... another Amazon Cheapie but hopefully good enough for what i need

Spong · Apr 15, 2017

Co-Pang-Yang said:
What camera did you get? Want to get dash cam for my disco

I fitted a Nextbase 402G camera. Not the top of the range but next one down, although I think it's been replaced by the 412 now. But it's HD and good video quality. They get good reviews from Which etc.

private penguin · Apr 15, 2017

Discovered the return of the 3 Amigos....

Typically I was driving BACK from visiting a friend who has diagnostic kit.

notenoughtime · Apr 15, 2017

Cleaned it today, and whilst checking stuff found it has a steering guard

neilly · Apr 15, 2017

private penguin said:
Discovered the return of the 3 Amigos....

Typically I was driving BACK from visiting a friend who has diagnostic kit.

Oh Dear, If you need a hand feel free to give me a shout.

notenoughtime said:
Cleaned it today, and whilst checking stuff found it has a steering guard

How did you not notice it had a steering guard?? was it that dirty??.............LOL

Cheers

Co-Pang-Yang · Apr 15, 2017

Checked the wheel bearings today.

Plenty of grease in there, right colour, one fine, three nipped up and all back together with no dramas.

Happy days

discodrivercumbria · Apr 15, 2017

Got a complete 2nd hand watts linkage and 2 radius arms a few weeks ago, pushed old bushes out and replaced with genuine Landrover, rubbed down and painted, removed old ones today, fit my refurbed ones, new drop links, anti roll bar bushes and ride height sensors, didn't take long to change as all was done, the ride height sensors need calibrating now as i could not get one connection apart, stuck tight as! few swear words!

notenoughtime · Apr 16, 2017

neilly said:
How did you not notice it had a steering guard?? was it that dirty??.............LOL

Cheers

It is painted black lol

biketeacherdave · Apr 16, 2017

Fixed the leaking rocker cover gasket it was missing 1 of its rubber washers right at the back of the cover then turned my attention to the wheel arch extensions
Turned them to this

From this

neilly · Apr 16, 2017

I took the SLS filter out and washed it under a tap. Expensive they are , about £6 for a new one.

Spent a few hours with the Fender as I was missing it.

Cheers

Feathers McGraw · Apr 16, 2017

neilly said:
I took the SLS filter out and washed it under a tap. Expensive they are , about £6 for a new one.

Spent a few hours with the Fender as I was missing it.

Cheers

£6?? I can only find them for £40+.

Co-Pang-Yang · Apr 16, 2017

Spend the afternoon wondering what bigger turbos are around that I could fit to my 300tdi engine

neilly · Apr 16, 2017

Feathers McGraw said:
£6?? I can only find them for £40+.

Darn it, now i cannot find it , it was on the bay of flea, for just the filters.

Cheers

neilly · Apr 16, 2017

Feathers McGraw said:
£6?? I can only find them for £40+.

Right , this is where I saw it.
191789504388 on the bay.

Cheers

Feathers McGraw · Apr 16, 2017

neilly said:
Right , this is where I saw it.
191789504388 on the bay.

Cheers

Brilliant! I could only find the full assembly with the pipe, I'll be getting one of these though. Thanks!!

private penguin · Apr 16, 2017

new dashcam arrived today - sadly doing family stuff so no chance to fit it

Spent some time yesterday catching up with a friend who is selling his D1... annoyingly D1 and D2 have different stud patterns for the wheels as would have bought a nice set of wheels off him otherwise!

IandiscoV8 · Apr 17, 2017

Work done on the 300 tdi,
I took off the old Downpipe with catalyst - flexy was leaking bad, fiddle getting it off.
OK read the manual mmm - next step..........

Had to go and buy a decent 3 tonne jack from machine mart, nice piece of kit, bloody heavy though, did the job of getting axle dangling down enough, found my old heavy duty axle stands which were bought for my old series one UVS 876 (where are you now?) now nicely supported.

The old down pipe replaced with a solid straight thru one - not so much smoke while driving and feels a little bit faster.
New air filter fitted.
replacing the Bias plate and springs tomorrow.

Question; is anyone breaking a manual 300tdi or V8 in Northumberland or Co Durham, I need a good centre console or has anyone got one going spare - I would like to do this job while i'm doing the bias plate.

Cheers Ian

brian47 · Apr 17, 2017

As promised, the weather took a turn for the better so I decided to replace the window winding regulator in the driver's door. No real problems, just fiddly, especially getting the motor to mesh with the gears on the regulator, but it went into place eventually.

While I had the door card off I reseated the window frame in the door, since I replaced the door latch mech. there had been a bit of a gap at the top front which let the water in when I got it washed. Looks ok now.

The other job I did while I was inside the door was to give the bottom 6 inches or so a squirt with Dinitrol 3125 cavilty wax. I've had a couple of aerosol cans since I had the underside done.

All-in-all not a bad afternoon's work.

gstuart · Apr 17, 2017

brian47 said:
As promised, the weather took a turn for the better so I decided to replace the window winding regulator in the driver's door. No real problems, just fiddly, especially getting the motor to mesh with the gears on the regulator, but it went into place eventually.

While I had the door card off I reseated the window frame in the door, since I replaced the door latch mech. there had been a bit of a gap at the top front which let the water in when I got it washed. Looks ok now.

The other job I did while I was inside the door was to give the bottom 6 inches or so a squirt with Dinitrol 3125 cavilty wax. I've had a couple of aerosol cans since I had the underside done.

All-in-all not a bad afternoon's work.

how much of ur knuckles u got left , lol

bet ur pleased to get these kind of job out of the way

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

P38 mmm I feel some money is going to be spent!

Well-Known Member

D3 Grandad

Similar threads