Magicgrotto
Well-Known Member
TURN the RADIO UP ! 
Jake ingleby
Well-Known Member
So I did at bit of digging on the smell issue turns out there was a bottle of milkshake and something that had turned into liquid, they have both been in there since September. They were both in the seat pocket behind me I felt a sick dragging it out of the pocket and cleaning it up
Magicgrotto
Well-Known Member
Jake on the belt sqweeeeeeek ! Did you notice any wear on the edge of the belt ? and did you check for any play in the water pump ?
chazadagreat
Active Member
http://www.ebay.co.uk/itm/282331807427?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
where did you go off roading?
Jake ingleby
Well-Known Member
There was no were on the belt, where is the location of the water pump
brianconwy
Well-Known Member
The rear mudflap brackets have s seen better days so this weekend sorted out the passenger side one. The remains of the bracket and stay.
The attachment point on the chassis on its way out.
There was a hole where the bracket attaches to the wing which I had to fit a small patch to.
All finished complete with new mudflap.
Next weekend I have the other side to do.
The attachment point on the chassis on its way out.
There was a hole where the bracket attaches to the wing which I had to fit a small patch to.
All finished complete with new mudflap.
Next weekend I have the other side to do.
Co-Pang-Yang
Well-Known Member
Collected my stainless manifold from work.
That just leaves a straight through stainless centre section to find and will have the full set
Would have gone home and chucked it on tonight but I've got to be 210 miles away in Wales by 9am so night in the lorry at base tonight and 2am start in the morning
That just leaves a straight through stainless centre section to find and will have the full set
Would have gone home and chucked it on tonight but I've got to be 210 miles away in Wales by 9am so night in the lorry at base tonight and 2am start in the morning
on the 300 tdi,
Today I sorted a few electrical gremlins, 2 indicators working not working.
Cleaned some of the plastic trim at the back - looks good now.
Plastic gear change centre console cracked and broken in several places - need a new one as the handbrake lever trapping my hand on the console - anyone got one going spare?
Ian
Today I sorted a few electrical gremlins, 2 indicators working not working.
Cleaned some of the plastic trim at the back - looks good now.
Plastic gear change centre console cracked and broken in several places - need a new one as the handbrake lever trapping my hand on the console - anyone got one going spare?
Ian
RyanDay1
Well-Known Member
Magicgrotto
Well-Known Member
You may have to wait for ansa Ryan ! He's CRYING over how much he just devalued his truck !
got through plenty of rags and brushes along with a can of carb cleaner
took the sensors out and put a hose pipe through it , then allowed it to completely dry off
surprising how much hard carbon i was able to scrape out of the body
fingers crossed am thinking it's got to be better than before and maybe improving things
Co-Pang-Yang
Well-Known Member
Oh I forgot also updated the audio.
Ye old original rover tape player
When you don't have radio keys you have to improvise
USB and new wiring harness in
And in, this will be the fifth Land Rover my trusty Alpine has seen
And now the missus can to her iPod, yay
Ye old original rover tape player
When you don't have radio keys you have to improvise
USB and new wiring harness in
And in, this will be the fifth Land Rover my trusty Alpine has seen
And now the missus can to her iPod, yay
brianconwy
Well-Known Member
You won't know if the performance increase is due to the cleaning or EGR blanking.
. Not that it matters.
Dragonwalker
Well-Known Member
You won't know if the performance increase is due to the cleaning or EGR blanking.
He should just enjoy it, till something else goes wrong.
Shimsteriom
Master Procrastinator
Last time I tried to remove a rear view mirror, I had to buy a new windscreen as well...
