tomcat59alan said:
Still enjoying it then Colin? Guess you got that problem sorted by the dealer, Been off line for a while so lost the outcome of your previous post. ;)
Click to expand...
Got most things sorted Alan but the air-con is back to being a no-no. They're willing to take it back for a fix, but domestically I have a few things to sort first which will probably mean by the next ice age I will have my air-con back! I'm heading off on a decent run this week to take Mrs B to spend time with the grand children in Herts and then her sister in Worcs - we'll just leave the windies open. Hope you well and getting some sun in Tricky.
 
Frenchdame said:
Got most things sorted Alan but the air-con is back to being a no-no. They're willing to take it back for a fix, but domestically I have a few things to sort first which will probably mean by the next ice age I will have my air-con back! I'm heading off on a decent run this week to take Mrs B to spend time with the grand children in Herts and then her sister in Worcs - we'll just leave the windies open. Hope you well and getting some sun in Tricky.
Click to expand...
Hi Colin, I'm back in England at the moment, got off the Island before the temperature goes off the scale.Glad to hear your both still active.;) I feel fine at the moment,just marking time till I can get behind the wheel again.Have a safe journey and enjoy yourselves. Regards.
 
Today I removed the crank sensor, put a multimeter across the black and black white connectors and got a resistance reading. Checked the red /? connection for volts with the ignition on. Got a low voltage reading. All refitted then decided to remove the rocker covers to replace the gaskets. Since the engine is suposed to be only 4k miles old I was pleased to see all looked new .cleaned the covers ready for painting. I was going to leave them wire brushed but one is a bit pitted.Going for black crackle finish.
 

Attachments

  • 20180709_144119.jpg
    20180709_144119.jpg
    289.7 KB · Views: 170
  • 20180709_144100.jpg
    20180709_144100.jpg
    283.2 KB · Views: 159
tomcat59alan said:
Today I removed the crank sensor, put a multimeter across the black and black white connectors and got a resistance reading. Checked the red /? connection for volts with the ignition on. Got a low voltage reading. All refitted then decided to remove the rocker covers to replace the gaskets. Since the engine is suposed to be only 4k miles old I was pleased to see all looked new .cleaned the covers ready for painting. I was going to leave them wire brushed but one is a bit pitted.Going for black crackle finish.
Click to expand...
You're bored!
 
PPP38vouge said:
View attachment 152333 View attachment 152334 View attachment 152335 View attachment 152336 View attachment 152337 View attachment 152338 View attachment 152339 Gave mine a full detail,
Wash then clay barred it.
Washed again then paint renavator.
Coat of autoglym resin polish.
Then a coat of canabura wax.
Used my new wheel woolies, brought up the wheels like new.
Then polished my new pipes.
Click to expand...


That's a beautiful example!! :cool:

What happened to your stainless side steps?
 
Henry_b said:
That's a beautiful example!! :cool:

What happened to your stainless side steps?
Click to expand...
Thanks Henry_b,
I do like to see her shine and put in a lot of time and effort in making her look her best most of the time, I removed the stainless side steps because I thought that stuck out a bit too far and ruins the lines of it, am thinking about some black LR ones they seem to look better to me.
 
PPP38vouge said:
Thanks Henry_b,
I do like to see her shine and put in a lot of time and effort in making her look her best most of the time, I removed the stainless side steps because I thought that stuck out a bit too far and ruins the lines of it, am thinking about some black LR ones they seem to look better to me.
Click to expand...

I believe side steps add an extra something to the lines of the P38. ;)

Don't get me wrong she looks amazing without them, but the Black LR ones would look very nice.. :)

They are one of the first upgrades i plan on adding to my Vogue. :D
 
PPP38vouge said:
I removed the stainless side steps because I thought that stuck out a bit too far and ruins the lines of it, am thinking about some black LR ones they seem to look better to me.
Click to expand...

Don't know about that but I keep looking at the Terrafirma rock/tree sliders.
 
Bump.
Oh alright then, gave it a wash and had a go at adjusting the steering box. That went OK actually and has made a bit of a difference, the bummer is that while faffing about with that both front wheel bearings seem to need a bit of adjustment. :(:(
As I am due to make yet another quick trip back to the UK it's just as well I noticed that before it got to the next stage, the "fecking hell are they really that bad" stage.
 
Changed the heater matrix o rings just to cure the leak so I can use the the car this coming week waiting for new heater matrix to be delivered next week a Audi one so can do away with the o ring set up
 
Traced a mystery battery drain iv been having the last few days to my dsp amp. The amp has been loseing sound intermittently recently. Disconnect and reconnect it all works ok. Except today and battery vokts low and dropping before my eyes disconnect the amp battery stabilises.

Time for my new android install then thats been sitting on my bench the last couple of months.20180720_203314.jpg
 
Adjusted the front wheel bearings on both sides, did the 1st one in record time, sat inside having a rosy-lea and realised I hadn't backed off the nut a bit before reassembling, :mad::( so did it again. Have to say much easier using my brand new 1/2" drive hub nut socket than it was with the old tube type one.

Test drive afterwards and it was soon clear how bad the steering was before, you just get used to something that gets bad VERY slowly and don't notice it.

All good now so happy bunny.:):)
 
Drove her from Catterick, to Hounslow, to Shrewsbury. 415 miles and "only" 65 litres of fuel burnt. Which apparently means I got 29mpg. Which I was surprised by tbh. Still stupidly expensive when blokes I work with can do 500 miles on 40 quid. :(
 
Bix said:
Drove her from Catterick, to Hounslow, to Shrewsbury. 415 miles and "only" 65 litres of fuel burnt. Which apparently means I got 29mpg. Which I was surprised by tbh. Still stupidly expensive when blokes I work with can do 500 miles on 40 quid. :(
Click to expand...
But not in the style you travelled in,would you be seen dead on a moped.:eek::D
 
Put the battery on charge (again).
While the "usual suspects" are out of the equation; without regular longish journeys the battery drops below 12.4V after only 3 or 4 days.
I clearly either need a new battery, or, there's a significant parasitic drain happening.
Need to find the time to see what's happening (when I can get some day's free of sodding grand-kids).
 
DanClarke said:
Put the battery on charge (again).
While the "usual suspects" are out of the equation; without regular longish journeys the battery drops below 12.4V after only 3 or 4 days.
I clearly either need a new battery, or, there's a significant parasitic drain happening.
Need to find the time to see what's happening (when I can get some day's free of sodding grand-kids).
Click to expand...

Alternator output 14.5V?
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
2K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
539
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
801
Grrrrrr
Grrrrrr