Finished upper and lower ball joints on passenger side. Also fitted new caliper and brake disk, was a horrible job. Have to start on the drivers side next.
It's for a petrol nothing like that on a diesel. Here ya go later petrol engines.
https://www.rimmerbros.co.uk/Item--i-PCH000910
stuu
Well-Known Member
Just came in the pile of stuffHope you didn't pay anything for it. It's from a petrol engined car not a diesel.
Using that paternity leave wisely! IIRC the hard part is about to start. Keep an eye on the missus for depression once the sleep stops.
biketeacherdave
Well-Known Member
Nothing....as usuall
stuu
Well-Known Member
I was back to work 4days after self employed only doing 1 job a week 3 3 and a half day weeks to spend time with lil un and mrs too.
She had a pal round so I got out the way haha
Luckily lil man sleeps from about 2 230 till 7ish so I'm up for both of them so mrs can get a decent sleep
Wee bit of thrush on his tounge so he's on drips but luckily he is so quiet and content
Joss155
Well-Known Member
Is it much faff to sort heated seats. The drivers one doesn't work and I was to replace the element
stuu
Well-Known Member
Mine hasn't later seats in a 96 car plugs was different so one of the many previous owners never wired them in.
Also have all the later steps apparently the early cars don't have them curved and they protrude into the floor more
I stand corrected sir but it does look very much like the one I had to replace on my diesel couple of months ago.
biketeacherdave
Well-Known Member
I will check my poss il did put up a guide its a simple repair you don't need to replace the heating elements just repair them and if you want to uprate the stats so they actually get warm.
stuu
Well-Known Member
Gearbox is here Saturdays job fit it and do the rear crank oil seal
Rear diff input seal and iv also found the harmonic balancer is missing off the rear diff so that to fit aswell.
Looks like the manual has a clutch delay valve inline too so like the skid cars itl be getting taken off too
Rear diff input seal and iv also found the harmonic balancer is missing off the rear diff so that to fit aswell.
Looks like the manual has a clutch delay valve inline too so like the skid cars itl be getting taken off too
Should not as far as i am aware be a clutch damper fitted to the P38.
