brianp38dse
Well-Known Member
How many flexis did you get there are six if you are doing the pipes as well.
How many flexis did you get there are six if you are doing the pipes as well.
RangeRoller dt
Well-Sprung Member
That’s few more filters then 
Tenebreaux
Well-Known Member
Bollocks. I made if four. Where are the other two?
RangeRoller dt
Well-Sprung Member
Leave the two bestest you got on easiest to access part, then you get two next time you get an order in.
(Presuming two are serviceable)
(Presuming two are serviceable)
Tenebreaux
Well-Known Member
I didn't order any for the front cos they look OK.
brianp38dse
Well-Known Member
That's ok then 4 at the back 2 at the front.
Tenebreaux
Well-Known Member
Phew!
Datatek
Well-Known Member
So it's got a leak.Watched it sink over the last couple of days. Only does it wiv the relay unplugged! Then it'll start up for as long as I'm able to leave it
Yep somewhere, just not had chance to do the checks. Least i know the bags and lines are ok
300bhp/ton
Well-Known Member
@300bhp/ton so would your p38 on air not do that?
Just curious if you tried the same before you changed.
J
Just curious if you tried the same before you changed.
J
Wazzajnr
Well-Known Member
Investigated the duff front indicator. Unfortunately, bulb and wiring are fine so it's the output from the LCM at fault.
For now, wired it in parallel with the side repeater and ordered new chip for the LCM.
Flashes at double speed still but at least they all flash now.
For now, wired it in parallel with the side repeater and ordered new chip for the LCM.
Flashes at double speed still but at least they all flash now.
I have a spare LCM, if it's the same as yours you're welcome to try it?
Wazzajnr
Well-Known Member
This is mine, It's an 06 4.4V8
If you have one spare, i might just take you up on that. Much less hassle than soldering new chips to the board!!! How much do you want for it?
Attachments
I have these 2, the one on the left is closest but does have a fault in that the brake lights come on when you start the car but at least it's a different fault to yours. The one on the right is from a petrol but may be too old. I seem to remember it worked in mine but the rear LED lights flashed when it did the bulb check.
Wazzajnr
Well-Known Member
Thanks mate. The new chips should arrive Wednesday next week so I'll see if they fix it. If not I'll let you know and I'll try one of yours. Cheers
See how you get on. It may be possible to take a dump of the code from yours and put it on the one I have thats closest to your. Won't be able to after you swap the chip though.
