RangeRoller dt
Well-Sprung Member
Mine are so long I cut them into ‘extra’ ones just use 1/3 so I got 3 times as many
brianp38dse
Well-Known Member
Checked the viscous coupling,greased the uj's and the sliding joints on the props, lubed the door hinges and check straps. oil levels tomorrow then finish painting the garage door after rubbing down and priming it today.The Boss won't let me leave the grounds as I'm in the at risk category
Know how you feel my boss is the same, no going out at risk
Checked the viscous coupling,greased the uj's and the sliding joints on the props, lubed the door hinges and check straps. oil levels tomorrow then finish painting the garage door after rubbing down and priming it today.The Boss won't let me leave the grounds as I'm in the at risk category
You are if that kitchen isn't finished!
Wazzajnr
Well-Known Member
Vaguely remember reading somewhere that the sensors are about face on nanocom if that's what you're using.
I might be wrong though, it seems to happen more with each passing year!
tomcat59alan
Well-Known Member
All done.
Attachments
Datatek
Well-Known Member
Very smart, is that floor slippery?
RangeRoller dt
Well-Sprung Member
Wow I liked the old one but that is far fancier. Hard work payed off
tomcat59alan
Well-Known Member
No Keith, just clean
,doesn't stay that way for long.tomcat59alan
Well-Known Member
The Enemy said she liked the old one as well.
.I prefered the gas range, the induction hob takes some getting used to.
RangeRoller dt
Well-Sprung Member
They are okay when you get used to them, patience it is not as instant as gas.
Old one was homley
Old one was homley
If you keep being proactive you're going to give the rest of us a bad name. I only greased my doors the other day because the creak was so bad people on the other side of the carpark look up to see what the noise was. And the wife scorned me for not fixing it weeks ago.Checked the viscous coupling,greased the uj's and the sliding joints on the props, lubed the door hinges and check straps. oil levels tomorrow then finish painting the garage door after rubbing down and priming it today.The Boss won't let me leave the grounds as I'm in the at risk category
stuu
Well-Known Member
Thank you for the heads up. Snap on device was used
Datatek
Well-Known Member
As the barn is blocked with a big pile of rubbish waiting for the tip to open, I moved the project P38 to the lean to so I can re-time the FIP and do some other jobs. The aircon is screeching, hopefully the idler bearing or the clutch, that's waht comes of it being stood unused for 3 months. I have 4 new tyres waiting to be fitted when the lock down ends, then the car will hopefully be usable.
Last edited:
You won't be allowed in now. Still ...
RangeRoller dt
Well-Sprung Member
Every time I mention her P38 she reminds me it still needs 4 new tyres to get MoT, the rear airbags need doing and it is running rich... so I try to pretend it doesn't exist. Which is a shame because the ol' girl is going to waste :/Tell her if she thinks they are bad should hear the ones on her P38!
did the crankcase breather upgrade
