Datatek

Well-Known Member

• Yesterday at 19:21

• #41,041

Pug957 said:

Today I finally got replacement under trays through the post, on they went to cover up the oil leaks. Can't see them, they're not there........

Click to expand...

Don't worry, when the under try is full, it will once again drip onto your drive.

 

kermit_rr

Very

Full Member

• Yesterday at 20:27

• #41,042

Anyone know if you can depressurise one airbag with diag? Save me hunting

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Yesterday at 20:31

• #41,043

Just pull the line?!

 

Mark Piercy

Well fumbled member....

Full Member

• Yesterday at 21:11

• #41,044

kermit_rr said:

Anyone know if you can depressurise one airbag with diag? Save me hunting

Click to expand...

Does it have the brass nut and olive on it?

 

kermit_rr

Very

Full Member

• Yesterday at 21:17

• #41,045

Mark Piercy said:

Does it have the brass nut and olive on it?

Click to expand...

No idea.. it's all back together i just need to do up the tie rod bolt at road height.. for extra space i thought about driving the wheel up the curb the jacking as necessary

 

kermit_rr

Very

Full Member

• Yesterday at 22:28

• #41,046

Anyone know the correct torque for the upper and lower control arms? I've replaced the lower (the one with the height sensor) but I'm seeing 2 different values, one with and one without a further 90 degrees

 

Mark Piercy

Well fumbled member....

Full Member

• Yesterday at 22:54

• #41,047

kermit_rr said:

Anyone know the correct torque for the upper and lower control arms? I've replaced the lower (the one with the height sensor) but I'm seeing 2 different values, one with and one without a further 90 degrees

Click to expand...

As long as the arms are bolted to metal and not aluminium carriers, I'd do them as tight as I can so the bush center pièce doesn't move under a hard movement. If they are aluminum carriers I'd be searching until I get the correct torque

 

RangeRoller dt

Well-Sprung Member

• Yesterday at 23:31

• #41,048

I’ve only got torque sheet for l322 td6 engine.

 

backinblack

Well-Known Member

Full Member

• Yesterday at 23:41

• #41,049

kermit_rr said:

Anyone know if you can depressurise one airbag with diag? Save me hunting

Click to expand...

My Foxwell does but the wire isn't long enough to reach you
Measure the hub centre to wheel arch on the side you haven't touched then jack the side up that you have. Take the wheel off and use another jack to get the hub at the right height, simples.

EDIT: I've only got Rave to MY2010