Got the LPG all back together, no leaks!! That's a start!!
Still getting random misfires on random multiple cylinders!!! Argh!!!
It's running fine on petrol and the gas injectors are definitely working, i think it could be spark related but I'm not sure where to go next.. wonder if it's plug gaps...
 
kermit_rr said:
You after one?
Click to expand...
These are the bits I need, the part number @RangeRoller dt gave was for the complete assembly, these just clip on to the sill finishers then clip into the part that fits on the sill.as you can see in the photo the plastic jaws snap and they probably aren't available separately and I need 6.Anyone got a scraper or some hidden in a shed ? @Grrrrrr height sensor linkages available to swap Or cash..;):D
 

Attachments

  • 16281742131714476755029178759044.jpg
    16281742131714476755029178759044.jpg
    142.9 KB · Views: 89
  • 16281743391136887379500084820077.jpg
    16281743391136887379500084820077.jpg
    138.3 KB · Views: 108
Today I set the air suspension back up on my P38. It had been driving me mad as it was just not right. Bad ride even though it sat right. The setting the EAS using a tape from wheel centre to wheel arch is no good as you have no way of knowing how much pressure is in the air bag. So the car always ends up feeling like it has a broken spring.
Solved this by making some calibration blocks. Using the blocks on just one axle at a time and taking the reading from sensors with body sat on the blocks gives 100% accurate reading. I recorded the readings and did the same for the other axle. Then imputed the new readings in to the EAS ECU and saved the readings. I did this for the different hight's.
The difference is remarkable the car drives nice and balanced and drive over the rough roads like it did when I first got it.
So then it was off to fill it up with fuel and find some bumpy roads:)
.
 
ponyrobin said:
Today I set the air suspension back up on my P38. It had been driving me mad as it was just not right. Bad ride even though it sat right. The setting the EAS using a tape from wheel centre to wheel arch is no good as you have no way of knowing how much pressure is in the air bag. So the car always ends up feeling like it has a broken spring.
Solved this by making some calibration blocks. Using the blocks on just one axle at a time and taking the reading from sensors with body sat on the blocks gives 100% accurate reading. I recorded the readings and did the same for the other axle. Then imputed the new readings in to the EAS ECU and saved the readings. I did this for the different hight's.
The difference is remarkable the car drives nice and balanced and drive over the rough roads like it did when I first got it.
So then it was off to fill it up with fuel and find some bumpy roads:)
.
Click to expand...
You wouldn't have to look far around here.:rolleyes: All the road repair money is used by Liverpool council for LGBT workshops and limp wristed liberal Social workers.:rolleyes::mad: And Welcome.
 
ponyrobin said:
Today I set the air suspension back up on my P38. It had been driving me mad as it was just not right. Bad ride even though it sat right. The setting the EAS using a tape from wheel centre to wheel arch is no good as you have no way of knowing how much pressure is in the air bag. So the car always ends up feeling like it has a broken spring.
Solved this by making some calibration blocks. Using the blocks on just one axle at a time and taking the reading from sensors with body sat on the blocks gives 100% accurate reading. I recorded the readings and did the same for the other axle. Then imputed the new readings in to the EAS ECU and saved the readings. I did this for the different hight's.
The difference is remarkable the car drives nice and balanced and drive over the rough roads like it did when I first got it.
So then it was off to fill it up with fuel and find some bumpy roads:)
.
Click to expand...

Blocks of the correct size is the way to go for ease.
Pressure in the bags is really a bit immaterial as a certain PSI will lift xx wt at any height. So don’t worry about PSI.
Fink you will find 60-65 will lift it to whatever height you want, unless you put a dead body in the back then it may need a few more PSI :).

Oh and Welcome:).

J
 
Checked the plugs, look fine adjusted the gap down a bit no difference. Next, swap plug leads in case the blue magnacor ones are no good o_O
 
marjon said:
Blocks of the correct size is the way to go for ease.
Pressure in the bags is really a bit immaterial as a certain PSI will lift xx wt at any height. So don’t worry about PSI.
Fink you will find 60-65 will lift it to whatever height you want, unless you put a dead body in the back then it may need a few more PSI :).

Oh and Welcome:).

J
Click to expand...
Thanks, I am not entirely new to the forum have been here a few times. I had a P38 HSE 4.6 on gas way back around 2003.
It was a dog of a thing. The liners had slipped and I ended up with gasket trouble. The LPG was problematic to start with as had not been fitted properly.
It was very tired old thing I was glad to see the back of it.
I now have a 2001 DT have been running it for 3 years no engine problems only some of the usual EAS issues. I bought it off a friend so I knew its background. He had it for years.
What I ment about the pressure is that if the sensors are not set just right it gives the same afect as having a brocken spring the car rocks about on the two highest air bags and gives a bad ride even though the car may sit right.
 
marjon said:
Blocks of the correct size is the way to go for ease.
Pressure in the bags is really a bit immaterial as a certain PSI will lift xx wt at any height. So don’t worry about PSI.
Fink you will find 60-65 will lift it to whatever height you want, unless you put a dead body in the back then it may need a few more PSI :).

Oh and Welcome:).

J
Click to expand...
What are these blocks you speak of?
Bit of 3x2 or summut techy?o_O
 
ponyrobin said:
What I ment about the pressure is that if the sensors are not set just right it gives the same afect as having a brocken spring the car rocks about on the two highest air bags and gives a bad ride even though the car may sit right
Click to expand...

sensor settings can affect things. Pressure no.

J
 
One rocker shaft fully done and reassembled, worse one still to do. Forecast means that may be an achievement for the weekend as I don't see being outside with power tools on the menu!



Freezing the shaft for a while (stop sniggering at the back there) plus baking the support brackets at 140C for half an hour made it pretty painless. Started from the centre brackets out and it took only about 10 minutes to get it all together. Love the smell of hot oil in the kitchen!
 
Scotiawhiskers said:
One rocker shaft fully done and reassembled, worse one still to do. Forecast means that may be an achievement for the weekend as I don't see being outside with power tools on the menu!



Freezing the shaft for a while (stop sniggering at the back there) plus baking the support brackets at 140C for half an hour made it pretty painless. Started from the centre brackets out and it took only about 10 minutes to get it all together. Love the smell of hot oil in the kitchen!
Click to expand...

Prefer beef dripping for me chips:D:D
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
533
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
797
Grrrrrr
Grrrrrr