crap on the discs?Developed a nice steering shudder under braking recently, very bad if I accelerate then immediately stomp on the brakes, the wheel shakes badly.
There is also a nice pulsation through the brake pedal when braking, oh what fun.
Oh and the weird bit if I brake very gently from say 70 it's fine until I reach around 35mph and she starts to shimmy and pulsate. grr!!!
Could be, to be fair it feels like the front discs are bent at right angles
if you're lucky, you can get it off with repeated braking, but wet n dry will get the nasty offCould be, to be fair it feels like the front discs are bent at right angles
Steering damper?Could be, to be fair it feels like the front discs are bent at right angles
could be
It's possible one of the slider feet has come off the guide? I did one for a client recently as it had dried up and dropped off
Pictures pictures pictures!!!!
Warped disks?Developed a nice steering shudder under braking recently, very bad if I accelerate then immediately stomp on the brakes, the wheel shakes badly.
There is also a nice pulsation through the brake pedal when braking, oh what fun.
Oh and the weird bit if I brake very gently from say 70 it's fine until I reach around 35mph and she starts to shimmy and pulsate. grr!!!
I have found my EAS leak drivers rear bag has a pin hole which is shame as they are Arnott gen2s
No is the dilemma I payed £249 for a full set which what they want for one rear bag now and I will cane as a pair, or do I go for ordinary bagsView attachment 234717
Discs and pads most likely need changing and the pulsating will be your ABS working ok. If you replace the disc and pads make sure you drive carefully and gentle progressive braking for the first 500 miles otherwise you will warp the new discs.Developed a nice steering shudder under braking recently, very bad if I accelerate then immediately stomp on the brakes, the wheel shakes badly.
There is also a nice pulsation through the brake pedal when braking, oh what fun.
Oh and the weird bit if I brake very gently from say 70 it's fine until I reach around 35mph and she starts to shimmy and pulsate. grr!!!
Sanding off the pad deposits and breaking in the discs again is cheaper
Well, Noah finally put his woodwork set away and the arc building battalion has been sent on leave so finally managed to have looksee what the issue is and yep Brian, pollen filter drivers side wet through so a bit of work to do there. However just checked the AC drain also and all good, Thought it would be as the navigators side was wet a couple of years ago and did the stick poking arm wet with black crud manoeuvre then and its still good now.
Its your life at the end of the day buddy.Sanding off the pad deposits and breaking in the discs again is cheaper
Found the problem. Took dor panel off and all 3rivets missing or snapped. With a bit of jiggling up and down to get back into position refitted with some self drilling screws I had. Jobs a good un, goes up and down OK now and under its own steam. YipppeeeIt's possible one of the slider feet has come off the guide? I did one for a client recently as it had dried up and dropped off
