if it works in either low/high box with difflock selected but wont with difflock not selected you may have a snapped half shaftHi
Have an V8 Disco 1 with an Auto gearbox in it. Appears the transfer box on High / Low and failed and won't drive, BUT will drive with Diff Lock selected.
Any ideas welcomed
Cheers
Dave
if it works in either low/high box with difflock selected but wont with difflock not selected you may have a snapped half shaft
dont think he read either of our helpfull repliesdidnt you read what i said
didnt you read what i said
if it works in either low/high box with difflock selected but wont with difflock not selected you may have a snapped half shaft
shame it wasnt the rear coz thats **** easy to do front takes a bit more timeWell - Front prop shaft spins when D or R selected in Diff Lock Low and High. So I'm assuming that the issue is front axle related and best place to start is with the CV joints and work my way inward towards the front diff?
you could remove caps on axle and see if either spin then cvs,can be checked by jacking one wheel up and turning wheel if prop is turned okay if not thats the side
shame it wasnt the rear coz thats **** easy to do front takes a bit more time