djbarren

New Member

• Sep 16, 2013

• #1

Hi all. Here is my defender 90 restoration. I am at the stage now where all the panels are away for paint. So here are a few photos of the work carried out over the past few months.


Before


During


As you can see the Bulkhead is in a bad way.






Daddy's little helpers getting stuck in.


Donor Bulkhead. Had to be striped, then had to remove the inner skin to repair it as the land rover this came from was rolled.


And again.


Donor chassis, from a puma.




Help stripping the chassis for galvanising.


Galvanised Bulkhead.


Galvanised Chassis.


Chassis being built into a rolling chassis.


200tdi engine and gear box on route to chassis. (fully re built)


Engine Installed.


Bulkhead on Route.


Driveable Chassis.

More Photos to follow. These are just to wet your appetite.

 

Last edited: Sep 16, 2013

J

joeyb

Member

• Sep 17, 2013

• #2

Looks class, but me thinks that you have too many little helpers for a ninty !

 

Dan_Trials

Well-Known Member

• Sep 17, 2013

• #3

Very nice, going to last you a while when its done!

 

T

TheJoker

Active Member

• Sep 17, 2013

• #4

Absolutely awesome! I wish I had the space to do that. Very jealous. Keep up the good work.

 

djbarren

New Member

• Sep 17, 2013

• #5

joeyb said:

Looks class, but me thinks that you have too many little helpers for a ninty !

Click to expand...

Ha Ha, more of a hindrance........ Think there more excited about it than I am

Should have it nearly completed in a month r two r three!!!!!!! Can't wait.

 

SteNova

Well-Known Member

• Sep 17, 2013

• #6

nice! its gonna look a lot newer than most of the parts with the pumas number plates

 

djbarren

New Member

• Sep 17, 2013

• #7

SteNova said:

nice! its gonna look a lot newer than most of the parts with the pumas number plates

Click to expand...

LOL, that was sorted before galvanizing.

I have also used the pumas diesel tank, and the breakers left the exhaust in place. So I have had to do some work on the filler pipe and the exhaust needed some modification coming from a 200tdi engine to the puma. One thing for certain is, it will confuse the MOT center over here when that day eventually comes.

 

djbarren

New Member

• Sep 17, 2013

• #8

Towbar fitted today. Please ignore the copper grease.


Puma Diesel Tank and Home made Pipe Work.

 

Dan_Trials

Well-Known Member

• Sep 17, 2013

• #9

Looking good. Nice neat and tidy job.

 

djbarren

New Member

• Sep 17, 2013

• #10

Dan_Trials said:

Looking good. Nice neat and tidy job.

Click to expand...

Thanks Dan_Trials. Appreciate all the kind words folks.

 

djbarren

New Member

• Sep 20, 2013

• #11

Had a free couple of hours tonight. So back to work.

Drill out holes after galvanizing and re-tap holes for Mud Flaps.



All Fitted.

 

djbarren

New Member

• Sep 23, 2013

• #12

Feeling excited, got the phone call to go and lift the tub, canopy, roof and windscreen from the paint shop tomorrow.

That only leaves the doors, wings and bonnet to do, and a few bits n bobs

 

djbarren

New Member

• Oct 8, 2013

• #13

I've just finished repairing the doors, now ready for paint.

 

djbarren

New Member

• Oct 9, 2013

• #14

Todays progress, tub and seat box fitted.



Made a start on the new led lights.



Picked up my front bumper from my mates machine shop and fitted these. Now the bumper is to be primed again, rubbed down and painted.



Doors, wings and bonnet left to paint guy. Getting there slowly but surely.

 

djbarren

New Member

• Jul 10, 2014

• #15

It's been a while since I posted on here, but here is the truck cab nearly finished.

Painting the wheels a satin white.



Wheels being cured in an industrial bakers oven we had lying about from when the mother inlaw used to bake.



Finally nearly finished.







Light bar fitted, it just needs lowered.



It's up for PSV on Tuesday. Hopefully it goes through ok. Few things to do over the weekend and a few more photos will follow.

 

mick the builder

Well-Known Member

• Jul 10, 2014

• #16

Lovely looking 90. Well done.

 

djbarren

New Member

• Jul 10, 2014

• #17

mick the builder said:

Lovely looking 90. Well done.

Click to expand...

Thank you. I'ts been a labour of love to say the least. I've been that busy with work and the 90 lately I've been neglectful of this site. So apologies for not having posted to many intermediate stage photos.