dag019
Well-Known Member
Great stuff where's the best guide to understand how to do this?
Here. Although you will only need the first part. It is very easy to remove the transfer box leaving the gearbox in place:
Remove the props
remove handbrake and back plate (may not need to do this with a standard drum set I have a disc conversion)
Remove the gear and diff lickage
disconnect the breather
disconect the diff lock light switch and battery earth if fitted
remove the speedo cable
Remove chassis mount
unbolt from the main gearbox recording the position of each bolt as they are differant lengths
It will then slide back and drop conviniently on your chest knocking the wind out of you and can then be slid out from under the vehicle.