Unfortunately, very likely true ..
Or he needs a new plate number because his current one in on the radar
Tazz070299
New Member
You did a runner!
You owe him £75 (entrance fee + 35425% interest)
3 Chocolate cakes
2 cups of tea and
a free drive off road at eastnor in your new gaylander.
SnowmanV8
Well-Known Member
You did a runner!
You owe him £75 (entrance fee + 35425% interest)
3 Chocolate cakes
2 cups of tea and
a free drive off road at eastnor in your new gaylander.
Haha the price of discovery's ATM i might have a gaylander for her and a disco for myself!
blue beasty
Leaks an prone to bits dropping off
Not sure....various peeps at various points gave me money
Pretty sure I'm not out of pocket so don't worry
robint
Well-Known Member
Not sure....various peeps at various points gave me money
i payed ya !
blue beasty
Leaks an prone to bits dropping off
top-cat
Well-Known Member
Im afraid I didnt payDid I say you dint?
Sorry i will sort it when i next see you if thats ok?
Freddy 007
Gone but not forgotten
Question:
During the wheel bearing change at the show some grease/oil leaked from the bottom of the swivel housing when the two top bolts came out that where holding the break caliper bracket on. It seems to still be leaking. Is there anything I can do to fix the leak before I give it some one shot?
TIA
During the wheel bearing change at the show some grease/oil leaked from the bottom of the swivel housing when the two top bolts came out that where holding the break caliper bracket on. It seems to still be leaking. Is there anything I can do to fix the leak before I give it some one shot?
TIA
robint
Well-Known Member
have you got a drain off point on the bottom of swivel housing ? if you have drain the oil out and as you said replace it with one shot
forgot to say make sure you can undo the filler one first aswell
Freddy 007
Gone but not forgotten
i'm pretty sure I do have a drain off, but I was thinking the new oneshot will leak out if I can't cure the leak 1st.
Is there a way of doing something or is it just a stuffed seal..
robint
Well-Known Member
one shot is grease not oil , likely hood is yes could be a stuffed seal you could cheat by undoing all the nuts and removing round washer and putting new seal back in but ! you would have to split seal and place split at top of housing
Tazz070299
New Member
It may not leak. Originally your swivel joint will have been filled with oil and only later 90s had grease, which tends to leak less. Therefore once you've drained the rest of the oil and tightened the drain plug it may not leak.
Warm the sachet first in fairly hot water for about 5 minutes then it should pour into the swivel housing easier...
Thinking about that !!
the older Series and some early 90/110s have the drain plug, they should have oil in, I think it's because they have a king-pin bush that is splash fed and the excess drips back down ... James will tell if I'm wrong
Can't remember if the one-shot is OK with that type ...
the older Series and some early 90/110s have the drain plug, they should have oil in, I think it's because they have a king-pin bush that is splash fed and the excess drips back down ... James will tell if I'm wrong
Can't remember if the one-shot is OK with that type ...
