F

Fosatron

New Member
Please help from NZ
My 2001 td5 ES will not lock up in 4 gear at 50mph at all when the car is warmed up. I have managed to get lock up when cold but once warm and I have to slow down or speed up and it goes out of lock up it won't lock up again. Have had gear box flushed 3 times but no remedy. Help greatly appreciated
 
Truly you ought to be locking up at approx 55mph according to the speedo.

As a test, select third gear and see what speed it goes into lock-up; should be about 50mph.


Dave
 
Thanks for the help guys. It doesnt lock up even at 60mph or 100kmh. Cant seem to get it to lock in 3 gear either? any ideas what would cause this. Stall test didnt indicate an issue with torque converter. Gear box shifts smoothly
 
Fosatron said:
Thanks for the help guys. It doesn't lock up even at 60mph or 100kmh. Cant seem to get it to lock in 3 gear either? any ideas what would cause this. Stall test didn't indicate an issue with torque converter. Gear box shifts smoothly
Click to expand...


Hi mate, there is a Motorised Valve (MV) in the valve block of the autobox and it sounds like it's not working. MV4 from memory. If you have RAVE, check it out in there.

Really James Martin is the kiddy for gearboxes, hopefully he'll be along soon.


Cheers
Dave
 
Thanks Dave
RAVE reckons MV3 is lock up valve. Where is the valve block for the auto gear box. I assuming its a specialist job to fix those valves?
Thanks for the help
 
Last edited:
Hi Simon, when you remove the autobox sump, the valve block is immediately visible and accessible.


I have never removed any on these MV's to clean or replace so can't speak from personal experience, but I do know the absolute cleanliness is required to work on them.

If you haven't already got a RAVE workshop manual, get hold of one off ebay or the like and check it out. I don't think it would be out of your ability to have a look at this.


Dave
 
Hi, I know this is a long time ago now but did you ever get to the bottom of the issue?
Mine is a 2001 ES auto with the same problem.
Many thanks!
 
The op hasn't been on this site since getting the original helpful advice back in 2013. I can't help you, perhaps someone else will come online.
 
Hi, start with a stall test to rule out those things maybe

1691564033389.jpeg
 
Hi, thanks for the replies.
Yes, I have completed a stall test and all is within the normal range. Oil and filter changed a few times.
Thanks
 
You must log in or register to reply here.

Similar threads

KiwiTDI
Disco 1 Torque converter lock up clutch “slipping” after lock up
Replies
7
Views
524
KiwiTDI
KiwiTDI
E
Auto gearbox woes
Replies
3
Views
770
sierrafery
sierrafery
Maat
Disco 2 Torque converter won't go in all the way
Replies
8
Views
1K
kevstar
kevstar
T
Central locking not working on all doors except drivers
Replies
6
Views
814
Stanleysteamer
Stanleysteamer
E
2001 d2 auto no torque converter lockup
Replies
9
Views
2K
Eggusone
E