Hello everyone, I am brand new here and have a problem and need help.
I need an original map for a TD5 with NNN500020 and ABS, preferably without ECR and without catalytic converter.
Background: I have a problem with the ABS block.
Every time I change gear, the ABS modulator comes on, but without the TC lighting up. Even with a load change when you go from coasting back onto the accelerator.
The accelerator pedal seems to be OK, but I have 0.7 volts on pin 10 on the ABS module at idle and 1.7V at full throttle. However, the Nanocom says in the ABS module under Throttle 0 at idle and 85% when the accelerator pedal is depressed. If I disconnect pin 10 in the ABS block and drive, the TC lights up permanently (logically) and the ABS block no longer works when changing gear or load. So I think it is due to the accelerator pedal position. I no longer have the original file and only have a .tun file.
Does anyone have an idea or can help me with a map?
I need an original map for a TD5 with NNN500020 and ABS, preferably without ECR and without catalytic converter.
Background: I have a problem with the ABS block.
Every time I change gear, the ABS modulator comes on, but without the TC lighting up. Even with a load change when you go from coasting back onto the accelerator.
The accelerator pedal seems to be OK, but I have 0.7 volts on pin 10 on the ABS module at idle and 1.7V at full throttle. However, the Nanocom says in the ABS module under Throttle 0 at idle and 85% when the accelerator pedal is depressed. If I disconnect pin 10 in the ABS block and drive, the TC lights up permanently (logically) and the ABS block no longer works when changing gear or load. So I think it is due to the accelerator pedal position. I no longer have the original file and only have a .tun file.
Does anyone have an idea or can help me with a map?
