Hi all, long time no post, on my nanocom my MAP sensor is reading 120deg. And im getting a fault code.
2.1 inlet air temperature circuit
4.1 inlet air temperature circuit
6.1 inlet air temperature circuit
I have tried another known working unit and still the same, does anyone have any ideas, as i have blanked off my egr does it matter?
Ta kindly paul
2.1 inlet air temperature circuit
4.1 inlet air temperature circuit
6.1 inlet air temperature circuit
I have tried another known working unit and still the same, does anyone have any ideas, as i have blanked off my egr does it matter?
Ta kindly paul