gozzy

Active Member

• Aug 11, 2012

• #1

Hi all I wondered if anyone could help me, Ihave just got myself a 2nd hand super winch 9.0 and I have connected it all up, and it's not working, it worked before I brought it, but now it has stopped, it doesn't seem to make any noise when pressing the switch forward anD backwards, the cable comes out when I turn the leaver to freel spool, but it doesn't wana move, could it be the solonoid any ideas would be great thanks

 

wiltshire landyman

I’m back

• Aug 12, 2012

• #2

solenoid could be faulty or more than likely a bad earth

 

auf_wiedersehen_pet

Well-Known Member

• Aug 12, 2012

• #3

wiltshire landyman said:

or more than likely a bad earth

Click to expand...

Earths are like women. They cause so much aggro - make sure they are clean and tight!

 

D

Dales

New Member

• Aug 12, 2012

• #4

I had one on my old fourtrak and it was a bad earth on mine,

Is your control for the winch a remote control or cabled ?

 

gozzy

Active Member

• Aug 12, 2012

• #5

I earthed it back to the battery is that right? And it's a cabled remote

 

wiltshire landyman

I’m back

• Aug 12, 2012

• #6

gozzy said:

I earthed it back to the battery is that right? And it's a cabled remote

Click to expand...

yep always the best way

 

gozzy

Active Member

• Aug 12, 2012

• #7

Have finally got the winch to make a clicking noise when pressing the button but the wires smoke a lot, and the solonoid clicks but the drum doesn't move

 

Pikey

Dummy Ejection Facilitator..

• Aug 12, 2012

• #8

It's fooked???

 

90boy

Well-Known Member

• Aug 12, 2012

• #9

gozzy said:

Have finally got the winch to make a clicking noise when pressing the button but the wires smoke a lot, and the solonoid clicks but the drum doesn't move

Click to expand...

give the motor a gentle tap with a hammer could be stuck brush's

 

Deasy

Well-Known Member

• Aug 12, 2012

• #10

Goz come round mine Tuesday night an we will have a look pal

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Aug 12, 2012

• #11

gozzy said:

Have finally got the winch to make a clicking noise when pressing the button but the wires smoke a lot, and the solonoid clicks but the drum doesn't move

Click to expand...

Heh, don't run it any more!

As said a tap wiv' a' 'ammer sometimes works, but it might also be clogged with mud (very likely) and need a stripdown/rebuild.

 

Pikey

Dummy Ejection Facilitator..

• Aug 12, 2012

• #12

Hot/smoking cables = more load/current than the cables can handle. or too much resistance at some point between the battery and the motor.

So either motor is seized? or it's sticking and resisting the flow of leccy. Or it isn't earthed sufficiently. Current flowing to earth will be same as current been drawn from battery. if it can't flow then it will overheat as the resistance builds up.

I know you've earthed to battery but is the battery earth strap at least as large as the winch earth cable?? no point putting 20mm earth on the winch if the battery earth strap is only 6mm braided.