broada28
Active Member
Hi everyone
this might sound a bit daft but my land rover series 3 diesel has sat for about 6 months and the transfer box is refusing to go into high range, you put in in and it just pops straight out again once I lift the clutch, low range works ok in all gears and the oils are ok and i looked in the inspection plate and theres no bits lying around.
also Im having to change the engine from a 3 bearing diesel to a 5 bearing one because the bore and pistons gone, loud knocking and a cracked block.
Please advise
1, any ideas about high range issue
2, is the swap to a 5 bearing engine easy as i guess it bolts straight.
thank you in advance for any advise.
this might sound a bit daft but my land rover series 3 diesel has sat for about 6 months and the transfer box is refusing to go into high range, you put in in and it just pops straight out again once I lift the clutch, low range works ok in all gears and the oils are ok and i looked in the inspection plate and theres no bits lying around.
also Im having to change the engine from a 3 bearing diesel to a 5 bearing one because the bore and pistons gone, loud knocking and a cracked block.
Please advise
1, any ideas about high range issue
2, is the swap to a 5 bearing engine easy as i guess it bolts straight.
thank you in advance for any advise.