jamesmartin · Oct 16, 2018

The Mad Hat Man said:
thats OK then. Pity LR didnt know that.

they said the same about r380s we built for them then rejected those with play eventually the engineers agreed that they should have 0- to 2 thou preload rather than 0 to 2 thou free play on the taper bearings,also with the new axles we built for lr and these were lr engineers from lr inspecting the builds

resto_d1 · Oct 18, 2018

Bulkhead clean

n jerk

dieseldog69 · Oct 18, 2018

Is that the only rotten bit of the chassis?

resto_d1 · Oct 18, 2018

dieseldog69 said:
Is that the only rotten bit of the chassis?

Yes

Up front

I'm going to have a propper look at the rear of chassis and set a hammer and chisel to it as I think it may be too far gone on rear. I'm guessing it will be a 1/4 chassis job. Atleast there's propper drawings for fender chassis!

dieseldog69 · Oct 18, 2018

resto_d1 said:
Yes

Up front
I'm going to have a proper look at the rear of chassis and set a hammer and chisel to it as I think it may be too far gone on rear. I'm guessing it will be a 1/4 chassis job. At least there's proper drawings for fender chassis!

You gonna get a 1/4 chassis for it or get some 2.5mm laser cut and build it with new spring buckets and a rear cross member?

resto_d1 · Oct 18, 2018

Quarter chassis on back I think. Means literally cut, slide, check, weld. My best bet I think. The parts list is growing - seat box is in a nasty way in places. Shame they didn't use galv washers or similar. Wherever there's been a steel bolt on alli the reaction has just eaten it. I kind of wish this truck was mine. For some reason it's way less daunting than disco. With the disco however I get the comfort and camper back!

resto_d1 · Oct 21, 2018

Well the wheel bearings made sense when I installed. Did up tight, slackened 90 degree then pulled at the hub whilst spinning and hand tightening until play was gone. I don't think too tight but I can always adjust when I drive it if so.

Just painted and fitted out 2nd. Need to bolt up disc and fit.

resto_d1 · Oct 21, 2018

Well the wheel bearings made sense when I installed. Did up tight, slackened 90 degree then pulled at the hub whilst spinning and hand tightening until play was gone. I don't think too tight but I can always adjust when I drive it if so.

Just painted and fitted out 2nd. Need to bolt up disc and fit.

View attachment 161102

resto_d1 · Oct 21, 2018

Forum seems to be playing up at the moment. Double posts and struggling to upload. I'll save my pictures and do a decent upload once a bit further. Got myself some corroless too. Got to get these a frame brackets off on next day on it!

The Mad Hat Man · Oct 21, 2018

it doesnt double post - it just takes about 30 seconds to update your post. having posted once, just watch Lz-live and you will see it update.

Pics are a different matter

.

dieseldog69 · Oct 21, 2018

resto_d1 said:
Forum seems to be playing up at the moment. Double posts and struggling to upload. I'll save my pictures and do a decent upload once a bit further. Got myself some corroless too. Got to get these a frame brackets off on next day on it!

I'm thinking the same, I have begged that someone puts another 50p in the meter in the server room, I blame the bestiality porn and online ordering of Dominoes.

dieseldog69 · Oct 21, 2018

resto_d1 said:
Forum seems to be playing up at the moment. Double posts and struggling to upload. I'll save my pictures and do a decent upload once a bit further. Got myself some corroless too. Got to get these a frame brackets off on next day on it!

I'm thinking the same, I have begged that someone puts another 50p in the meter in the server room, I blame the bestiality porn and online ordering of Dominoes

The Mad Hat Man · Oct 21, 2018

Dominoes or Dominos?

dieseldog69 · Oct 21, 2018

The Mad Hat Man said:
Dominoes or Dominos?

Depends on how much gin they've been drinking ?

How come you got smiley faces an I don't?

The Mad Hat Man · Oct 21, 2018

skill?

dieseldog69 · Oct 21, 2018

The Mad Hat Man said:
skill?

My money is on you being the dark master pulling the strings from behind the curtain, mwahahahah (strokes beard maniacally)

The Mad Hat Man · Oct 21, 2018

dieseldog69 said:
My money is on you being the dark master pulling the strings from behind the curtain, mwahahahah (strokes beard maniacally)

you leave my beard alone, with your greasy, painty mits

dieseldog69 · Oct 21, 2018

The Mad Hat Man said:
you leave my beard alone, with your greasy, painty mits

Hands are full of metal shards and welding burns after today's ordeal, did slap some paint on the welds to stop it from going rusty until I next attack it.

Will upload piccies in my fred when forum is behaving normally(well as normal as it ever does LOLZ)

The Mad Hat Man · Oct 21, 2018

dieseldog69 · Oct 21, 2018

The Mad Hat Man said:
PPE?

Yep, was the cleaning up that saw me cutting me self to bits and the forgetting how hot the steel gets when blazing away

resto_d1 · Oct 24, 2018

dieseldog69 · Oct 24, 2018

resto_d1 said:
View attachment 161323

I got one of them, currently disguised as a doorstop

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads