brianp38dse
Well-Known Member
If this link works its martyuk test sheet.
https://www.landyzone.co.uk/attachments/p38-door-latch-tests-pdf.109717/
https://www.landyzone.co.uk/attachments/p38-door-latch-tests-pdf.109717/
Thanks Brian
The plot thickens
Wouldn't start again today when car was in hospital car park
I locked and unlocked many time with no success and then finally she started no problem
While I was trying to start the door locks were going up and down like a wh*** Kn******* at times but not all the time.
Seemed to be nearly starting when I stopped turning her over.
Is there a ballast resistor like I think some Fords used to have?
The plot thickens
Wouldn't start again today when car was in hospital car park
I locked and unlocked many time with no success and then finally she started no problem
While I was trying to start the door locks were going up and down like a wh*** Kn******* at times but not all the time.
Seemed to be nearly starting when I stopped turning her over.
Is there a ballast resistor like I think some Fords used to have?
Well, I got mine from Island-4x4. I used to recommend them to everyone but then I had to send back a faulty part and ended up having to threaten legal action before my money was refunded. No communication at all. Pity as until then they'd always been great.
Always worth checking Rimmer Bros. Sometimes they surprise you. Actually, they always surprise but occasionally it is a nice one where they are cheaper. Dingocroft are similar.
Used Paddock Spares with no issues. And another place whose name I always forget, something like the Big Four.
Always worth checking Rimmer Bros. Sometimes they surprise you. Actually, they always surprise but occasionally it is a nice one where they are cheaper. Dingocroft are similar.
Used Paddock Spares with no issues. And another place whose name I always forget, something like the Big Four.
Fitted new RF thingy a few weeks back and I still get the starting problem.
Last time I managed to get nanocom on it which said Camshaft sensor circuit malfunction. It wouldn't clear, but then car started
I thought if it was broken it would stay broken
When car starts it runs just fine
Last time I managed to get nanocom on it which said Camshaft sensor circuit malfunction. It wouldn't clear, but then car started
I thought if it was broken it would stay broken
When car starts it runs just fine
idle control valve sticking maybe? Try checking the flywheel sensor, if dirty it can fool the ecu into thinking it's not turning over??
idle or crank sensor?
if you rave, you should be able to locate via that. If not ill check for you later
if you rave, you should be able to locate via that. If not ill check for you later
what can I say but hey your welcome!
name that film?
name that film?
