Charles Banbury

Charles Banbury

Active Member
Everything was great yesterday 2.5 DSE running like a top no problems starting warm or cold (hot fix fitted) today nothing,it churns and churns and refuses to fire. Any ideas? RAC are on the way but I would like to have some ideas for them. I can hear the tank pump working. 2002 DHSE. Many thanks as ever.
 
I had a new door handle fitted last week by RR specialists. It worked fine after that. Does the re sync involve the key and door locks? Can I do that?
 
Possibly. I think Wammers means the code in the BECM doesn't match the engine ECU one so will need synching again. In short you need to read the code from the EMS and write it into the BECM. Need synchmate or something like Nanocom if that is the case.
 
Charles Banbury said:
RAC man here. It fires with some spray into the air filter then nothing. Does that mean its not the sync?
Click to expand...

Sounds like it. Go easy with that Easystart. It can cause damage. I think there's an emergency fuel stop switch behind the driver's kick-panel but it sounds like a sync issue. If you take the fuel pipe off is the lift pump pumping fuel?
 
Yep, sounds like it may of jumped out of diagnostic sync. between the engine ecu & becm.

Nanocom or sync-mate will do the job.
 
You must log in or register to reply here.

Similar threads

Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
5K
BDC
B
Freddie17
Mk1 td4 recent trouble starting
Replies
15
Views
2K
Freddie17
Freddie17
1988smithy
L322 3.6 tdv8 heavy smoker, likes a drink too
Replies
7
Views
2K
lynall
L
Flossie
P38A Duchess won't fire up.
3 4 5
Replies
96
Views
8K
Mark Piercy
Mark Piercy
S
[Newbie]: TD5 starting problems
2
Replies
22
Views
2K
sfinnie
S