R

Ricochet

New Member

• Feb 28, 2017

• #1

Hi Every body, have put a 2.25 3 bearing petrol into my series 3 with the fly wheel and clutch on it that came wih the engine. i know the engine is ex military but was 12 volt but to my dismay the starter that i pulled from my old engine which was a 2.5 petrol does not work on the flywheel it just spins.
where the teeth a different size on various flywheels does anyone know. the starter is a lucas type with solanods built into it rather than separate.
will my 2.5 petrol engine flywheel fit my 3 bearing engine as that seems to be a way that i may get it to work?

 

freelance

Well-Known Member

• Feb 28, 2017

• #2

Is the bendix stuck ?

 

Rougharse Racing

Well-Known Member

• Feb 28, 2017

• #3

freelance said:

Is the bendix stuck ?

Click to expand...

As said above, sounds like the bendix is stuck, If starter gear on the the flywheel was different I would expect it to make horrible graunching noises.

 

blue beasty

Leaks an prone to bits dropping off

• Feb 28, 2017

• #4

That would be my guess anorl

 

R

Ricochet

New Member

• Mar 1, 2017

• #5

I thought the bendix was stuck as well but changed it for an identical starter which has done the same. im wondering if the teeth are not different if the reach is different instead.

 

C

Colthebrummie

Well-Known Member

• Mar 1, 2017

• #6

The flywheel ring gear has got all of its teeth hasn't it? Just try moving the car a couple of inches and see if it catches then. Also try testing the spare starter on a bench to see if it is throwing the bendix.

Col

 

sausage

Member

• Mar 2, 2017

• #7

Your pre engaged 2.5 starter won't work its a 9 tooth gear helix type, Bendix type 11 tooth is what you need

 

SpringDon

Well-Known Member

• Mar 2, 2017

• #8

^ what he said.
They're completely different part number which should give a clue. You actually buy the 11t bendix (244711) separately but I wouldn't like to guarantee it would fit (worth a try though as its a lot cheaper than a starter motor)

 

tottot

Well-Known Member

• Mar 2, 2017

• #9

+1 on the above,the standard starter for petrol two and a quarter had a solenoid on the bulkhead