G-man
BBQ king
you have already made your mind up so just fooking buy the things
you clearly don't like the fit new springs and shocks advice given by people with experience of having been there and done it...........
you have already made your mind up so just fooking buy the things
you clearly don't like the fit new springs and shocks advice given by people with experience of having been there and done it...........
V8jon
Well-Known Member
If your springs are knackered and have sagged fitting 1" spacers may only take it back to standard height but with weak soft springs
this was mine before the 2" lift with the worn out springs
and this is after the 2" lift
it has gone up about 3" due to the fact that the old springs were knackered
what I'm trying to say is you ain't gonna have a 1" lifted disco with 1" spacers and old knackered springs
this was mine before the 2" lift with the worn out springs
and this is after the 2" lift
it has gone up about 3" due to the fact that the old springs were knackered
what I'm trying to say is you ain't gonna have a 1" lifted disco with 1" spacers and old knackered springs
LandyCallum
New Member
Thanks Jon, that looks very much like the height of mine haha, maybe a tad higher on the front tho, thanks 
wiltshire landyman
I’m back
what an utter load of bollix you clearly have no idea on offroad driving.
no amount of suspension/body lift will stop yr axles /diffs from grounding out,and they will over humps/lumps/bumps/mounds/hills whatever you wanna call them
the only way to gain extra clearance is by fitting larger tyres
arienol
New Member
Which kit did ya go for pal?
V8jon
Well-Known Member
I went for bearmach +50mm springs(standard load) with procomp +50mm shocks from 4muddyfeet.com and i'm very impressed.
Only thing is I forgot to order the boots for the shocks cos they don't come with them but that was my fault not theirs.
BA 3751 - Standard +50 Lift Kit Discovery 1 with std load
LandyCallum
New Member
MY AXELS DO NOT GROUND OUT!!! Pretty sure Ive said that about 4 times now. ONLY my belly and tail catch on obstacals :doh:
arienol
New Member
Is it perhaps your sills that are coming into contact with the ground?
Thanks Jon, that looks very much like the height of mine haha, maybe a tad higher on the front tho, thanks
I'd look at replacing the springs before fitting spacers if your disco is sitting as low as that at the front.
LandyCallum
New Member
yes, belly/sills, same thing lol
There is a just over 4 inch gap between tyre and wing (front) and about 5 inches (rear) tyres are 235's
There is a just over 4 inch gap between tyre and wing (front) and about 5 inches (rear) tyres are 235's
like I said, I'd replace the springs before fitting after market stuff to improve height.
LandyCallum
New Member
I will do , whats the best standard height manufacture?
, whats the best standard height manufacture?
