Salisburylander · Jan 19, 2025

Should a Defender sit slightly tilted forward or should it sit level? My Defender has been made into a camper and if anything, sits a bit low at the back. I’ve been given a set of 1” rear spring spacers and was wondering if I should go to the trouble of fitting them. I have standard height HD springs all around.

Any thoughts?

Tim4x4 · Jan 19, 2025

Try the attached instructions on measurement for suspension height.

dag019 · Jan 19, 2025

Salisburylander said:
Should a Defender sit slightly tilted forward or should it sit level? My Defender has been made into a camper and if anything, sits a bit low at the back. I’ve been given a set of 1” rear spring spacers and was wondering if I should go to the trouble of fitting them. I have standard height HD springs all around.

Any thoughts?

If you have HD springs at the front but then don’t have extra weight at the front e.g. winch etc. you will likly be sitting high at the front. Potentially if you just have a factory front end without heavy extras you would Be better with standard springs front end and Hd back end.

Salisburylander

Active Member

Tim4x4

Well-Known Member

Attachments

dag019

Well-Known Member

Similar threads