Bromsgrove Defender
Well-Known Member
300bhp/ton
Well-Known Member
Or raise the seat up. It won't give directly more length to the cab, but you'll need to bend your knees less, so a similar affect.
mathewpink
New Member
you can change the rear bulck head in an 88 for a 109 u get abit more that way the seat will go futher back
swarf
Member
Thanks, Sounded good so I tried it but found without the support that the orignal back rest gave it was uncomfortable after a while. Today I sliced the alloy rivets off the cross peice on the BHD to alow movement. Also sliced the alloy spot welds off the flat area of bhd and took a wedge shaped peice out of the box shaped wheel arches.This allowed the bhd to be beaten back but limited by the tank filler hose. the steel cross peice then repositioned itself a full 3" back where it was welded up with small gussets made up to the sides and rebolted to the cross peice. The seat base 4 bolts were then redrilled back 3/4". This may not sound much but the difference was amazing. I shall test drive it tomorrow. chris.
