So that would explain why it wouldn't when I just pushed them separately, obviously still need the vac advance too

Will go find the pipe and some large jubilees now anyway, then need to think of where to mount it! May settle for something onto the rocker cover as I don't have enough pipe to reach the wing :eek:
 
Dr_evil said:
Feck off :p it was ****ing it down ;) lucky I even got a video! Or bothered……


Had to put on my shooting gear in order to get waterproofed enough :eek:
Click to expand...

noooo, you'll stink em with oil and everything will smell you downwind
 
trax said:
noooo, you'll stink em with oil and everything will smell you downwind
Click to expand...

Was wildfowl waders only, top was an old waterproof I use for working in ;) Still wont make an ounce of difference given that I'm usually sat in a hole dug in the sand for it!
 
I cant til at least the weekend……need to sort out strengthening the seatbox so my fat ass doesn't cave it in :eek:
 
Dr_evil said:
Tis a little heavy for the box at the minute! 74kg and that seatbox has the central piece missing so its kinda just free floating, no way it'll hold me and a 25kg P38 electric seat as well
Click to expand...
well stick a scaff board across it :D
 
nrgserv said:
well stick a scaff board across it :D
Click to expand...

I don't have any :( got the cardboard to make some templates for repair sections though

Tomorrows job is service the engine, turn down idle as its a bit fast, sort the air intake pipework then do the roof so I can actually work on the insides of the cab when its raining!
 
Dr_evil said:
I don't have any :( got the cardboard to make some templates for repair sections though

Tomorrows job is service the engine, turn down idle as its a bit fast, sort the air intake pipework then do the roof so I can actually work on the insides of the cab when its raining!
Click to expand...
now I aint a v8 efi boffin, but wunt it be betterer to connect all the electronic maf ****e afore tweakin screws?
 
nrgserv said:
now I aint a v8 efi boffin, but wunt it be betterer to connect all the electronic maf ****e afore tweakin screws?
Click to expand...

Thats what I meant, gone and fetched me silicone hose and some big ass jubilee clips to use tomorrow then once its running I'll tweak the screw


Those 35s have put it a little out of my reach though :eek: gonna need to bring a box to stand on!
 
fergus123 said:
You may have seen this king cab,

$T2eC16FHJIIFHJEVTiyUBSUVOVm2dg~~60_12.JPG




land rover defender | eBay


bit of inspiration ;)
Click to expand...
Amazes me they get away with the rear hoop being so far rearward of the seats must be non compliant surely
 
MAF sorted out and plumbed in. Having lunch then gonna fire it up and see

Also done an oil and filter change
 
You must log in or register to reply here.

Similar threads

C
Truck cab fitting help
Replies
10
Views
585
Chonker
C
I
Series 3 Diff Pinion Spacer
Replies
7
Views
515
steve2286w
steve2286w
Z
What type of fuel pump ?
Replies
5
Views
300
Rangieman123
Rangieman123
pabloako
Length of accelerator push/control rod (Series 2)
Replies
4
Views
341
pabloako
pabloako
dvb668w
Series 3 One Shot swivel grease in the Diff... good or bad?
Replies
3
Views
463
tottot
tottot