ProcrastinatorFraser
Active Member
How did that go? everything went back together ok i assume? Fun, isn't it, taking stuff apart and being able to put it back together again.
ProcrastinatorFraser
Active Member
I'm changing bearings like-for-like, so bearings i'm getting timken ones, if they are available.
viamphie
Active Member
Yeah. There's a certain satisfaction when everything is clean and working. Nothing quite like the feeling when everything stays on when you test it.
ProcrastinatorFraser
Active Member
hahaha hopefully i'll get that feeling too
Bobsticle
De Villes Advocaat
I started mine at the beginning of the year. Clean and working should be about 2510 by my reckoning.
ProcrastinatorFraser
Active Member
Lol, any pics of her so far? have you atleast got yeh tool kit out?I started mine at the beginning of the year. Clean and working should be about 2510 by my reckoning.
Bobsticle
De Villes Advocaat
Lol, any pics of her so far? have you atleast got yeh tool kit out?
I get round to most things eventually. Just last month the Mrs asked me to hang a picture. All I have left is to find a nail and hammer.
Oh and its a He. 'Henry'.
Oh and a tip. Dont name yours until at least the fifth month. By then it will have told you its name.
ProcrastinatorFraser
Active Member
It allready had a name, WilfredI get round to most things eventually. Just last month the Mrs asked me to hang a picture. All I have left is to find a nail and hammer.
Oh and its a He. 'Henry'.
Oh and a tip. Dont name yours until at least the fifth month. By then it will have told you its name.
ProcrastinatorFraser
Active Member
Well, out of my 101 part order, i received 8 of it today.... whoopee f***...
ProcrastinatorFraser
Active Member
Well, it is, but on the site it was advertised as (i think) Bearmach or summet. They might have been packed in these boxes, not actually britpart though.
ProcrastinatorFraser
Active Member
Dear god: i just received 1 of my 3 parcels!!!
ProcrastinatorFraser
Active Member
what a crock of ****e. what a crock of ****e. what a crock of ****e. what a crock of ****e. what a crock of ****e. what a crock of ****e. what a crock of ****e.
As it turns out, the one cocking parcel i received was the X member. So, i set about cutting the rotten chassis out and putting new in.
Come to fitting the X member, guess what!
IT
DOES
NOT
FECKING
FIT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
and upon closer inspection, it's dented, welds are AWFUL, very tatty.
FOR FECKS SAKE i waited so FECKING long for
FECK
ALL
As it turns out, the one cocking parcel i received was the X member. So, i set about cutting the rotten chassis out and putting new in.
Come to fitting the X member, guess what!
IT
DOES
NOT
FECKING
FIT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
and upon closer inspection, it's dented, welds are AWFUL, very tatty.
FOR FECKS SAKE i waited so FECKING long for
FECK
ALL
ProcrastinatorFraser
Active Member
After a considerable amount of f*cking about, shouting, swearing, grinding, and welding, i got it to fit.Sounds like a Britpart part
Better get customizing it to fit. I was lucky with my rear cross member. Got it from Paddocks and it fell on.
Had to part the chassis rails with a jack, cut the corners of the U section the X member gives you, cut down the ends of the now flaps, cut off exhaust brackets, (have a coffee break) and drill out a hole for the internal wires.
A long and arduous clusterf*** of f***ed upness, i got it to fit. I think the person who made this X member only had a 3 year old's drawing of a land rover to go off.
ProcrastinatorFraser
Active Member
Apologies for the lack of pics recently. I got some today, welding up the chassis still. Got a new shipment of parts, i'll go in to detail tomorrow, i went straight for the outriggers
I'm just uploading some pics now to photobucket. Expect them soon
I'm just uploading some pics now to photobucket. Expect them soon
ProcrastinatorFraser
Active Member
For god's sake, i said that, uploaded them to photobucket and never added them here! Sorry.
Quickly burning through the welding rods!
There we have it. No pics of the X member yet, should have them tomorrow. Again, apologies for lack of pics.
Quickly burning through the welding rods!
There we have it. No pics of the X member yet, should have them tomorrow. Again, apologies for lack of pics.
jamesmartin
Well-Known Member
you look to be making a fair job
job
ProcrastinatorFraser
Active Member
Don't say that!! it will all go wrong now!!! :Oyou look to be making a fair
